Home
>> Products
>> OMRON
>> Sensor
>> Photoelectric sensor
>> Photoelectric sensor power built-in type
>> E3JK-TR13-C 2M times that of our conventional model (for the, OMRON E3JK-TR13-C 2M Built-in Power Supply Photoelectric Sensor
E3JK-TR13-C 2M times that of our conventional model (for the, OMRON E3JK-TR13-C 2M Built-in Power Supply Photoelectric Sensor
Brand:
OMRON
Name: Built-in Power Supply Photoelectric Sensor
Model: E3JK-TR13-C 2M
Power supply voltage: AC/DC power supply selectable type.
Sensing method: Through-beam (Emitter + Receiver).
Sensing distance: 40 m.
Output configu ration: Relay.
Long-distance Photoelectric Sensor.
That Supports AC/DC Power Supplies.
Long sensing distance that is approximately 8,
times that of our conventional model (for the,
Through-beam and Diffuse-reflective models).
(Through-beam: 40 m, Retro-reflective: 7 m, and,
Diffuse-reflective: 2.5 m.) .
Improved visibility:
A red LED that makes the spot visible.
Large indicators that can be seen even from a,
distance.
Improved operability.
(Enlarged sensitivity adjuster and operation selector)
Freely selectable power supply input (24 to 240 VDC, 24 to 240 VAC).
(Additional types added to the DC type lineup.)
Models with infrared LEDs are also available.
...More relevant models >>>>
Name: Built-in Power Supply Photoelectric Sensor
Model: E3JK-TR13-C 2M
Power supply voltage: AC/DC power supply selectable type.
Sensing method: Through-beam (Emitter + Receiver).
Sensing distance: 40 m.
Output configu ration: Relay.
Long-distance Photoelectric Sensor.
That Supports AC/DC Power Supplies.
Long sensing distance that is approximately 8,
times that of our conventional model (for the,
Through-beam and Diffuse-reflective models).
(Through-beam: 40 m, Retro-reflective: 7 m, and,
Diffuse-reflective: 2.5 m.) .
Improved visibility:
A red LED that makes the spot visible.
Large indicators that can be seen even from a,
distance.
Improved operability.
(Enlarged sensitivity adjuster and operation selector)
Freely selectable power supply input (24 to 240 VDC, 24 to 240 VAC).
(Additional types added to the DC type lineup.)
Models with infrared LEDs are also available.
Appearance: M8.
Sensing distance: 2 mm.
Connection method: Pre-wired Models (2 m) .
Cable specifications: PVC (oil-resistant.
Operation mode : NC .
Pin arrangement: --.
Applicable connector code: --.
Your Search for Proximity Sensors.
Starts with the World-leading.
Performance and Quality of the E2E OMRON E3JK-TR13-C 2M.
Standard Sensors for detecting ferrous metals.
Wide array of variations E3JK-TR13-C 2M Ideal for a variety of applications.
Models with different frequencies are also available to prevent,
mutual interference.
Superior environment resistance with standard cable made of oil,
resistant PVC and sensing surface made of material that resists,
cutting oil.
Useful to help prevent disconnection OMRON E3JK-TR13-C 2M.
Cable protector provided as a standard feature. Sensing method: Diffuse-reflective.
Appearance: Vertical.
Connection method: Pre-wired.
Sensing distance: 2m.
Water- and Oil-resistant.
Photoelectric Sensor with.
Metal Housing Used for Long.
range Sensing.
Excellent resistance against the water and oil.
Easy application in locations with oil mist.
Long-range sensing up to 30 m with Through-beam models OMRON E3JK-TR13-C 2M.
Shock resistance rated at 1,000m/s2.
Product lineup includes metal M12 pre-wired connector models.
NPN/PNP selector switch output. High performance price ratio standard type proximity sensor.
Standard cable protector.
The new DC two-wire type.
Non polar proximity sensor.
Type: DC two-wire / connector type OMRON Built-in Power Supply Photoelectric Sensor.
Polarity: none.
Shape: shield, M18.
Detection range: 7mm.
Action mode: NO. Cable length: 1 m OMRON Built-in Power Supply Photoelectric Sensor.
Quantity: 1.
For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website. Connection method: Pre-wired connector.
Cable length: 0.5 m.
Sensing distance: 100 ± 35 mm.
Model: PNP output.
A CMOS Laser Sensor That’s.
Optimum for Simple Measurements OMRON Built-in Power Supply Photoelectric Sensor.
A resolution of 0.002 mm that’s suitable for simple measure ments.
Stable measurements for any type of workpiece.
Models available with four different distance specifications.
Long-distance model for up to 1,000 mm.Intelliggent 2D reader for online stable reading E3JK-TR13-C 2M.
Characteristic：
1 body design, selection process simplification.
2 teaching functions to make the initial adjustment easier.
3 sensitive to the change of the workpiece, to all parts of aa stable, accurate reading OMRON E3JK-TR13-C 2M.
4 additional group function, no need to stop production line can be switched, greatly reduce the steps to deal with change.
Sensing distance: 2 mm.
Connection method: Pre-wired Models (2 m) .
Cable specifications: PVC (oil-resistant.
Operation mode : NC .
Pin arrangement: --.
Applicable connector code: --.
Your Search for Proximity Sensors.
Starts with the World-leading.
Performance and Quality of the E2E OMRON E3JK-TR13-C 2M.
Standard Sensors for detecting ferrous metals.
Wide array of variations E3JK-TR13-C 2M Ideal for a variety of applications.
Models with different frequencies are also available to prevent,
mutual interference.
Superior environment resistance with standard cable made of oil,
resistant PVC and sensing surface made of material that resists,
cutting oil.
Useful to help prevent disconnection OMRON E3JK-TR13-C 2M.
Cable protector provided as a standard feature. Sensing method: Diffuse-reflective.
Appearance: Vertical.
Connection method: Pre-wired.
Sensing distance: 2m.
Water- and Oil-resistant.
Photoelectric Sensor with.
Metal Housing Used for Long.
range Sensing.
Excellent resistance against the water and oil.
Easy application in locations with oil mist.
Long-range sensing up to 30 m with Through-beam models OMRON E3JK-TR13-C 2M.
Shock resistance rated at 1,000m/s2.
Product lineup includes metal M12 pre-wired connector models.
NPN/PNP selector switch output. High performance price ratio standard type proximity sensor.
Standard cable protector.
The new DC two-wire type.
Non polar proximity sensor.
Type: DC two-wire / connector type OMRON Built-in Power Supply Photoelectric Sensor.
Polarity: none.
Shape: shield, M18.
Detection range: 7mm.
Action mode: NO. Cable length: 1 m OMRON Built-in Power Supply Photoelectric Sensor.
Quantity: 1.
For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website. Connection method: Pre-wired connector.
Cable length: 0.5 m.
Sensing distance: 100 ± 35 mm.
Model: PNP output.
A CMOS Laser Sensor That’s.
Optimum for Simple Measurements OMRON Built-in Power Supply Photoelectric Sensor.
A resolution of 0.002 mm that’s suitable for simple measure ments.
Stable measurements for any type of workpiece.
Models available with four different distance specifications.
Long-distance model for up to 1,000 mm.Intelliggent 2D reader for online stable reading E3JK-TR13-C 2M.
Characteristic：
1 body design, selection process simplification.
2 teaching functions to make the initial adjustment easier.
3 sensitive to the change of the workpiece, to all parts of aa stable, accurate reading OMRON E3JK-TR13-C 2M.
4 additional group function, no need to stop production line can be switched, greatly reduce the steps to deal with change.
...More relevant models >>>>
Last one: OMRON Built-in Power Supply Photoelectric Sensor E3JK-TR12-C 2M
next one: OMRON Built-in Power Supply Photoelectric Sensor E3JK-TR14-C 2M
Related download