Home
>> Products
>> OMRON
>> Sensor
>> Photoelectric sensor
>> Photoelectric sensor power built-in type
>> E3JK-DN14 2M OMRON E3JK-DN14 2M
E3JK-DN14 2M OMRON E3JK-DN14 2M
Brand:
OMRON
Name: Built-in Power Supply Photoelectric Sensor
Model: E3JK-DN14 2M
Power supply voltage: DC.
Sensing method: Diffuse-reflective.
Sensing distance: 300 mm.
Output configu ration: NPN.
Long-distance Photoelectric Sensor.
That Supports AC/DC Power Supplies.
Long sensing distance that is approximately 8,
times that of our conventional model (for the,
Through-beam and Diffuse-reflective models).
(Through-beam: 40 m, Retro-reflective: 7 m, and,
Diffuse-reflective: 2.5 m.) .
Improved visibility:
A red LED that makes the spot visible.
Large indicators that can be seen even from a,
distance.
Improved operability.
(Enlarged sensitivity adjuster and operation selector)
Freely selectable power supply input (24 to 240 VDC, 24 to 240 VAC).
(Additional types added to the DC type lineup.)
Models with infrared LEDs are also available.
...More relevant models >>>>
Name: Built-in Power Supply Photoelectric Sensor
Model: E3JK-DN14 2M
Power supply voltage: DC.
Sensing method: Diffuse-reflective.
Sensing distance: 300 mm.
Output configu ration: NPN.
Long-distance Photoelectric Sensor.
That Supports AC/DC Power Supplies.
Long sensing distance that is approximately 8,
times that of our conventional model (for the,
Through-beam and Diffuse-reflective models).
(Through-beam: 40 m, Retro-reflective: 7 m, and,
Diffuse-reflective: 2.5 m.) .
Improved visibility:
A red LED that makes the spot visible.
Large indicators that can be seen even from a,
distance.
Improved operability.
(Enlarged sensitivity adjuster and operation selector)
Freely selectable power supply input (24 to 240 VDC, 24 to 240 VAC).
(Additional types added to the DC type lineup.)
Models with infrared LEDs are also available.
Square pole type approach switch direct current three wire type.
Wide visual field of action indicator.
Adjustable fixing hole.
Type: lead wire, wire length 2M.
Form: non shield, square cylinder.
Detection range: 5mm.
Output form: NPN.
Action status: NO. Appearance: Shielded, M18.
Sensing distance: 8 mm OMRON E3JK-DN14 2M.
Output configuration: DC 2-wire (without polarity) (3)-(4) pin arrangement E3JK-DN14 2M
Operation mode: NO.
Spatter-resistant Fluororesin,
coated Proximity Sensor.
Superior spatter resistance.
Long Sensing-distance Models added for sensing,
distances up to 15 mm.
Pre-wired Smartclick Connector Models are also available. Sensing method: Through beam.
Connection method (cable length): Pre-wired connector (0 OMRON E3JK-DN14 2M. 3 m).
Sensing distance: 300 mm.
Beams: Gap, 25 mm; Qty, 3.
Sensingwidth: 50 mm.
Output type: NPN open collector.
Compact Body, High-visibility.
Indicators, and Ideal for Picking.
Systems for Small Parts.
A variety of part sizes can be handled: F3W-D sensing,
width: 100 mm, F3W-E sensing width: 50 mm.
Low-profile Sensor with thickness of 8 mm and enlargeable,
work opening OMRON E3JK-DN14 2M.
Models with connectors are also available.
Support for XS5 Smartclick Connectors reduces work and,
simplifies wiring. Type: Shielded.
Appearance: Flat, 30 × 14 × 4.8 mm.
Sensing distance: 5 mm.
Repeat accuracy: 2 μm.
Cable specification: With Protective Spiral Tube.
Proximity Sensor with Separate OMRON Built-in Power Supply Photoelectric Sensor.
Amplifier Enables Easily Making High.
precision Sensitivity Settings.
Wide variety of Sensor Heads to select according to the,
application OMRON Built-in Power Supply Photoelectric Sensor. Flexible cables are used between Preamplifiers,
and Amplifier Units of the Sensor Heads.
High resistance to changes in ambient temperature.
Temperature characteristics of 0.08%/°C (for 5.4-dia. models).
Make simple and reliable detection settings with micron,
level precision using the teaching function OMRON Built-in Power Supply Photoelectric Sensor.
Check the seensing excess gain level on the digital display E3JK-DN14 2M.
Support for high-precision positioning and screening with,
fine positioning to maximize variations.
The E2C-EDA0 supports an EtherCAT Sensor,
Communications Unit or CompoNet Sennsor,
Communications Unit OMRON E3JK-DN14 2M. E3JK-T61 for firing type,
E3JK direct current mode: mode; shading ON,
Miniature amplifier built-in type photoelectric switch
Wide visual field of action indicator.
Adjustable fixing hole.
Type: lead wire, wire length 2M.
Form: non shield, square cylinder.
Detection range: 5mm.
Output form: NPN.
Action status: NO. Appearance: Shielded, M18.
Sensing distance: 8 mm OMRON E3JK-DN14 2M.
Output configuration: DC 2-wire (without polarity) (3)-(4) pin arrangement E3JK-DN14 2M
Operation mode: NO.
Spatter-resistant Fluororesin,
coated Proximity Sensor.
Superior spatter resistance.
Long Sensing-distance Models added for sensing,
distances up to 15 mm.
Pre-wired Smartclick Connector Models are also available. Sensing method: Through beam.
Connection method (cable length): Pre-wired connector (0 OMRON E3JK-DN14 2M. 3 m).
Sensing distance: 300 mm.
Beams: Gap, 25 mm; Qty, 3.
Sensingwidth: 50 mm.
Output type: NPN open collector.
Compact Body, High-visibility.
Indicators, and Ideal for Picking.
Systems for Small Parts.
A variety of part sizes can be handled: F3W-D sensing,
width: 100 mm, F3W-E sensing width: 50 mm.
Low-profile Sensor with thickness of 8 mm and enlargeable,
work opening OMRON E3JK-DN14 2M.
Models with connectors are also available.
Support for XS5 Smartclick Connectors reduces work and,
simplifies wiring. Type: Shielded.
Appearance: Flat, 30 × 14 × 4.8 mm.
Sensing distance: 5 mm.
Repeat accuracy: 2 μm.
Cable specification: With Protective Spiral Tube.
Proximity Sensor with Separate OMRON Built-in Power Supply Photoelectric Sensor.
Amplifier Enables Easily Making High.
precision Sensitivity Settings.
Wide variety of Sensor Heads to select according to the,
application OMRON Built-in Power Supply Photoelectric Sensor. Flexible cables are used between Preamplifiers,
and Amplifier Units of the Sensor Heads.
High resistance to changes in ambient temperature.
Temperature characteristics of 0.08%/°C (for 5.4-dia. models).
Make simple and reliable detection settings with micron,
level precision using the teaching function OMRON Built-in Power Supply Photoelectric Sensor.
Check the seensing excess gain level on the digital display E3JK-DN14 2M.
Support for high-precision positioning and screening with,
fine positioning to maximize variations.
The E2C-EDA0 supports an EtherCAT Sensor,
Communications Unit or CompoNet Sennsor,
Communications Unit OMRON E3JK-DN14 2M. E3JK-T61 for firing type,
E3JK direct current mode: mode; shading ON,
Miniature amplifier built-in type photoelectric switch
...More relevant models >>>>
Last one: OMRON Built-in Power Supply Photoelectric Sensor E3JK-DP13 2M
next one: OMRON Built-in Power Supply Photoelectric Sensor E3JK-DP14 2M
Related download