LK Automation Limited
Home >> Products >> OMRON >> Power/other peripheral devices >> Connection /Save wiring equipment >> Connector terminal station conversion unit >> XW2Z-150D Controllers with one touch OMRON XW2Z-150D

XW2Z-150D Controllers with one touch OMRON XW2Z-150D

Brand: OMRON
Name: Connecting Cables for Connector-Terminal Block Conversion Units
Model: XW2Z-150D
Cable length L: A, 1.5 m; B, 1.25 m.
Connect Connector-Terminal,
Block Conversion Units (XW2@) to,
I/O Units for Programmable,
Controllers with one touch.

Cable length L: A, 1.0 m; B, 0.75 m.
Connect Connector-Terminal,
Block Conversion Units (XW2@) to,
I/O Units for Programmable,
Controllers with one touch. Control supply voltage: 100/ 200 VAC; Without voltage fluctuation compensation.
Operating current: 1 to 2 A.
Accurate Detection of Heater Element OMRON XW2Z-150D.
Burnout Regardless of Heater Capacities.
Accurately detects a burned heater element or elements incor,
porated by a molding machine or packing machine and outputs,
an alarm signal XW2Z-150D
Precisely singles out the burned element even if one heater el,
ement among several heater elements has been burned out.
Applicable to small- to large-capacity heater elements.
All K2CU-F large-capacity, built-in current transformer models,
work with both single-phase and three-phase heaters OMRON XW2Z-150D.
Voltage fluctuation compensation function eliminates false,
alarms due to variations in the supply voltage. Static type reverse electric relay K2WR type.
Reverse power relay for household and marine generator.
A high precision power detection can be performed by the analog time division multiplier.
Through the rated voltage of the switch, adjust the current simulation of variable,
Can correspond to the rated value of all generators OMRON XW2Z-150D.
Due to the instant start in contact, the response difference is minimal,
Position detection with high accuracy. Sharing with voltage input, no need to control the power supply.
Because it is static, so the anti vibration impact ability, action stability OMRON Connecting Cables for Connector-Terminal Block Conversion Units.
Equipped with easy to manage and maintain the boot display with LED OMRON Connecting Cables for Connector-Terminal Block Conversion Units. Sensor type and connection: 3 line DC (PNP) /2 line 1-4 DC.
Actuator connection: actuator connection 3-4.
Port number: 8.
Cable length: 5m.
This series contains the optimal control case of the new thin,
Light connector terminal box, has better,
Environmental resistance and centralized management of I/O sensor connector,
Therefore, less artificial OMRON Connecting Cables for Connector-Terminal Block Conversion Units.
Wear resistant thin, protection grade can reach IP67.
Suitable for photoeelectric sensor,
Proximity sensor and sensor with I/O connector (M12) limit switch XW2Z-150D.
In addition, due to the increase of the rated current, the ground terminal is increased,
So it can support and connect the valve solenoid.
Contains ppower and action indicator light OMRON XW2Z-150D.
No matter how many ports are used, the installation method is used,
To ensure that the system can be easily expanded.


...More relevant models >>>>