SRT2-VOD16ML-1 OMRON SRT2-VOD16ML-1

OMRON Transistor Remote I/O Terminals with ConnectorsSRT2-VOD16ML-1

SRT2-VOD16ML-1 Introduce | SRT2-VOD16ML-1 Catalog/Manual/Instructions/Software download

Brand: OMRON
Name: Transistor Remote I/O Terminals with Connectors
Model: SRT2-VOD16ML-1
I/O classification: Digital output.
Internal I/O circuit common: PNP (+ common).
I/O points: 16.
I/O connection method: Sensor connector.
Compact Remote I/O Terminals that.
Save Wiring Effort and Enable.
Long-distance Communications.
Long-distance or high-speed communications,
mode is selectable.
Incorporates I/O connectors making it possible to,
minimize the size.
I/O connectors save wiring effort.
Flexible DIN track mounting is possible through a,
DIN track attachment.
Eight-point sensor connector models and 16-point,
MIL connector models are the same size.

classification: Power MOS FET relay output.
I/O points: 16 points.
Rated voltage: 24 VDC.
Relay coil rating: 24 VDC.
Applicable relay: G3DZ-2R6PL.
Ultra-miniature 8-point and 16-point,
Relay-mounted Terminals Ultra-compact.
(8-point models: 101 x 51 x 51 mm (W x H x D);
16-point models: 156 x 51 x 51 mm (W x H x D)),
Power MOS FET Relay and Relay models OMRON SRT2-VOD16ML-1.
DIN track mounting and screw mounting are available SRT2-VOD16ML-1 Name: Two-tier Screw Terminal Block.
Specifications: Inputs/Outputs;
8 inputs/8 outputs; NPN.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system OMRON SRT2-VOD16ML-1.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. Unit: Connector model.
I/O classification: Digital output.
Internal I/O common: NPN (- common) OMRON SRT2-VOD16ML-1.
I/O points: 16.
I/O connections: D-sub 25-pin connector.
Power supplyvoltage: 24 VDC.
I/O specification: 0.5 A, DC/transistor.
Digital I/O Units Compatible with MULTIPLE I/O TERMINAL,
Terminal block, connector, and high-density connector,
models are available.
The circuit block of the terminal block model can be,
mounted or dismounted for ease of maintenance without,
disconnecting the wires OMRON Transistor Remote I/O Terminals with Connectors OMRON Transistor Remote I/O Terminals with Connectors.
DIN track mounting. Specifications: Outputs; NPN (- common); 16 points.
I/O connections: MIL connector.
Rated internal circuit power supply voltage:
Supplied from the communications connector.
Rated I/O power supply voltage: 24 VDC.
Very Compact 16-/32-point Remote Terminals OMRON Transistor Remote I/O Terminals with Connectors.
Used in combination with Interface,
Conversion Boards (e.g., D-SSub) to,
connect to a wide range of interfaces SRT2-VOD16ML-1.
35 x 60 x 80 mm (W x D x H). I/O classification: Output.
Internal I/O circuit common: NPN (– common).
I/O points: 16.
Rated voltage: 24 VDC.
I/O rated voltage: 24 VDC.
Modulle Type that Allows PCB Mounting OMRON SRT2-VOD16ML-1.
Compact size at 60 x 16 x 35 (W x H x D).
Lineup now includes the 16-point input model and,
16-point output model.

...More relevant models >>>>