LK Automation Limited
Home >> Products >> OMRON >> Power/other peripheral devices >> Power Supply >> Switching power >> S8JD-35005C Switching Mode Power Supply Protection type: short circuit / over current / over voltage / over temperature OMRON S8JD-35005C

S8JD-35005C Switching Mode Power Supply Protection type: short circuit / over current / over voltage / over temperature OMRON S8JD-35005C

Brand: OMRON
Name: Switching Mode Power Supply
Model: S8JD-35005C
Capacity: 350W.
Output voltage: 5V.
Output current: 60A.
Low investment and high efficiency, shocked the market.
350W single group output switching power supply.
Protection type: short circuit / over current / over voltage / over temperature.
Forced air cooling with built-in DC fan.
PWM control and adjustment.
Cooling fan switch control.
Low cost, high reliability.

Square socket.
Equipped with a wide variety of square and round sockets,
Surface connection and back connection.
With a finger touch protection type.
With the fixed bracket, PYF cross tab.
Add no screw series. Type: Used for connecting Ionizers.
Cable length: 710 mm.
The highest level of ionization in its class OMRON S8JD-35005C.
Sensing and variable-AC system provides fast and meticulous ionization S8JD-35005C
Linked Ionizers cover a wide area without causing uneven ionization.
Digital ion display provides simple and reliable settings. Output voltage: 5 V.
Output current: 5 A.
Screw terminal Model: Without Bus Line (See note 2.).
Block-type Switch Mode Power Supply That.
Mounts to DIN Rail.
One model covers 30 to 120 W (12-V models) OMRON S8JD-35005C.
One model covers 60 to 240 W (24-V models).
Easy creation of multi-power supply configurations with different,
output power supplies connected together (5-V, 12-V, and 24-Vmodels).
Improve power supply system reliability by creating N+1 redun,
dant systems (12-V and 24-V models).
RoHS-compliant.
Input conditions: 80 to 370 VDC supported for DC input too,
(EC Directives and safety standards are not applicable OMRON S8JD-35005C. )
Operating temperatures to –20°C (24-V models). Control supply voltage: 220 VAC; With voltage fluctuation compensation.
Operating current: 4 to 10 A.
Accurate Detection of Heater Element.
Burnout Regardless of Heater Capacities OMRON Switching Mode Power Supply.
Accurately detects a burned heater element or elements incor,
porated by a molding machine or packing machine and outputs,
an alarm signal OMRON Switching Mode Power Supply.
Precisely singles out the burned element even if one heater el,
ement among several heater elements has been burned out.
Applicable to small- to large-capacity heater elements.
All K2CU-F large-capacity, built-in current transformer models,
work with both single-phase and three-phase heaters OMRON Switching Mode Power Supply.
Voltage fluctuation compensation function eliminates false,
alarms due to variations in the supply voltage. Cable with connector (1 to 2) /G79-O_C-_, G79-I_C-_.
L size: A, 3000mm; B, 2750mm.
Input use.
Cable and loose wire cable with loose wire pressing connecting terminal,
Connector cable, MITSUBISHI motor produced PLC connection cable. For MY relay, G2R-S relay socket.
Save hours of Push-InPlus terminal type to add product series.
Using Plus Push-In terminal, compared with the previous screw terminals,
Save wiring time (compared with the previous screw terminals, can shorten the wiring time of about 60%*).
Screw will not lloose, to achieve maintenance free S8JD-35005C.
The insertion force is small, the drawing strength is big, and the wiring time is saved, and the high reliability is simultaneously considered.
When connecting multiple strands, the use of non - holding mechanism,
Insert a word screwdriver to keep it OMRON S8JD-35005C.
2 wires can be inserted in each terminal.
DIN guide rail installation, screw mounting common.


...More relevant models >>>>