R88M-G Series/R7D-BP Series AC Servomotors/ Servo Drives OMRON R88M-G Series/R7D-BP Series

Support for a Wide Range of Applications with Position Control,
Speed Control, Torque Control.
High-speed Response.
The G-series AC Servomotors and Servo Drives have,
achieved high-speed response capabilities, with a high,
response frequency of 1 kHz.
Suppressing Vibration of Low-rigidity Mechanisms during,
Acceleration/Deceleration OMRON R88M-G Series/R7D-BP Series.
The damping control function suppresses vibration of,
low-rigidity mechanisms or devices whose ends tend to,
vibrate R88M-G Series/R7D-BP Series Two damping filters are provided to enable switching,
the vibration frequency automatically according to the direction,
of rotation and also via an external signal. In addition,
the settings can be made easily merely by setting the vibration,
frequency and filter values, and you are assured of stable,
operation even if the settings are inappropriate OMRON R88M-G Series/R7D-BP Series.
High-speed Positioning via Resonance Suppression Control,
The realtime autotuning function automatically estimates,
the load inertia of the machine in realtime and sets the,
optimal gain. The adaptive filter automatically suppresses,
vibration caused by resonance. Also, two independent,
notch filters make it possible to reduce vibration of a,
mechanism with multiple resonance frequencies OMRON R88M-G Series/R7D-BP Series. High-Speed and High-Precision.
G5 Series MECHATROLINK-II.
Communications with the Controller.
Data transfer using MECHATROLINK-II OMRON AC Servomotors/ Servo Drives.
Communications:
All control data that can be interfaced between the Servo Driver,
and the Controller is transmitted using data communications OMRON AC Servomotors/ Servo Drives.
This enables maximizing the Servomotor performance without,
restricting the transmission performance of the control signals.
Having a communications module built into the Servo Driver,
significantly saves space in the control panel. High-Speed and High-Precision OMRON AC Servomotors/ Servo Drives.
G5 Series EtherCAT Communications.
with the Controller.
High-accuracy positioning with fully-closed control.
Servo Drives for 400VAC globally widens applicable systems.
and environment, including large-scale equipment.
Safe design and Safe Torque Off (STO) function.
Vibration can be suppressed in acceleration/deceleration,
even in low-rigidity mechanical systems. Support for a Wide Range of Applications with Position Control,
Speed Control, Torque Control.
High-speed Response.
The G-series AC Servomotors and Servo Drives have,
achieved high-speed response capabilities, with a high,
response frequency of 1 kHz.
Suppressing Vibration of Low-rigidity Mechanisms during,
Acceleration/Deceleration.
The damping control function suppresses vibration of,
low-rigidity mechanisms or devices whose ends tend to,
vibrate. Two damping filters are provided to enable switching,
the vibration frequency automatically according to the direction,
of rotation and also via an external signal. In addition,
the settings can be made easily merely by setting the vibration,
frequency and filter values, and you are assured of stable,
operation even if the settings are inappropriate.
High-speed Positioning via Resonaance Suppression Control,
The realtime autotuning function automatically estimates,
the load inertia of the machine in realtime and sets the,
optimal gain R88M-G Series/R7D-BP Series. The adaptive filter automatically suppresses,
vibrationn caused by resonance OMRON R88M-G Series/R7D-BP Series. Also, two independent,
notch filters make it possible to reduce vibration of a,
mechanism with multiple resonance frequencies.