LK Automation Limited
Home >> Products >> OMRON >> Switch >> Push button switch >> button switch φ22(φ25) with light / without light / display lamp >> OMRON A22S-3A-02 Use 25-dia ring to install in 25-dia panel cutouts Knob-type Selector Switch A22S-3A-02

OMRON A22S-3A-02 Use 25-dia ring to install in 25-dia panel cutouts Knob-type Selector Switch A22S-3A-02

Brand: OMRON
Name: Knob-type Selector Switch
Model: A22S-3A-02
Appearance: Knob-type Selector Switch A22S.
Number of notches: 3 notches.
Resetting method: Automatic.
Output: SPST-NC + SPST-NC.
Color of Selector: Black.
Install in 22-dia. or 25-dia. Panel Cutout.
Lever for easily mounting and removing the Switch Unit.
Finger protection mechanism on Switch Unit provided as a standard feature.
Use 25-dia. ring to install in 25-dia. panel cutouts.
Mounted using either open-type (fork-type) or closed-type,
(round-type) crimp terminals.
IP65 oil resistance (non-lighted models).
IP65 (lighted models).

No. of notches: 3 notches.
Output: DPDT.
Reset method: Manual.
Lighting method: LED.
Separate Construction with Cylindrical.
16-dia. Body.
Same separate construction as the A16-series Pushbuttons with,
Miniature Design of 28.5 mm.
The same contacts can be used for both standard loads and,
microloads OMRON A22S-3A-02.
Oil-resistant IP65 models,
Conforms to EN60947-5-1. Modular panel direct mounting type, easy to install and maintain the basic type A22S-3A-02
The relay unit is modular and easy to maintain.
With LED action display function, so that the state of action at a glance.
Tropical treatment and high temperature.
Stable detection can be achieved with high ambient temperature.
G4 type, with a water tank and a water supply tank level display and prevent the function of automatic water idling caused by water shortage OMRON A22S-3A-02.
Package product name: 61F-G4 base * 1, 61F-11_ unit * 5.
Purpose: low sensitivity. Appearance: Knob-type Selector Switch A22W,
LED voltage-reduction lighting (without Voltage Reduction Unit).
Number of notches: 3 notches.
Resetting method: Manual.
Output: SPST-NO.
Operating voltage: 200 VAC OMRON A22S-3A-02.
Illumination color: R (red); Y (yellow); G (green); A (blue).
Install in 22-dia. or 25-dia. Panel Cutout.
Lever for easily mounting and removing the Switch Unit.
Finger protection mechanism on Switch Unit provided as a standard feature OMRON Knob-type Selector Switch.
Use 25-dia. ring to install in 25-dia. panel cutouts.
Mounted using either open-type (fork-type) or closed-type,
(round-type) crimp terminals OMRON Knob-type Selector Switch.
IP65 oil resistance (non-lighted models).
IP65 (lighted models). Ratings: Standard load; 5 A at 250 VAC, 4 A at 30 VDC.
Cable: VCTF cable *2.
Actuator: Roller plunger.
Cable length : 3 m.
Compact Limit Switch That''s Also.
Thin and Highly Sealed.
Approved by EN, UL, CSA, and CCC (Chinese standard) OMRON Knob-type Selector Switch.
(Ask your OMRON representative for information on approved models.)
Sealing characteristics that meet IEC IP67 degree of protection.
Triple-sealed construction:
Plunger section sealed via nitrile rubber packing seal and,
diaphragm; switch section sealed via nitrile rubber cap;
cable entrance sealed via encapsulating material.
Caable lengths of 3 and 5 m available on standard models A22S-3A-02.
Models also available with UL and CSA-certified cables.
Multiple mounting possible with Switches with Plungers.
Models with red LED indicators added to series for easy,
connfirmation of operation OMRON A22S-3A-02.
(Set by default to light for non-operation.)
VCTF oil-resistant cables with CE marking.
(Applicable only to standard models.)


...More relevant models >>>>