LK Automation Limited
Home >> Products >> OMRON >> Switch >> Liquid level switch >> Water leakage detection >> OMRON 61F-WLA Water Leak Alarm/Detector OMRON 61F-WLA

OMRON 61F-WLA Water Leak Alarm/Detector OMRON 61F-WLA

Brand: OMRON
Name: Water Leak Alarm/Detector
Model: 61F-WLA
Water Leak Alarm.
Flexible Setup according to Water Quality,
and Surrounding Wiring Conditions.
The operating resistance has a variable sensitivity from 0 to,
50 kΩ, so the best set values can be made according to the pre,
dicted water leakage, degree of overflow, water quality, or sur,
rounding wiring conditions.
The power supplied to the Sensing Band is 24 VAC, so opera,
tion is stable because there is no electrode deterioration from,
electrical corrosion.
A contact signal output enables monitoring from remote loca,
tions.

Output: DPDT.
Lighting: LED.
Operating voltage: 12 VAC/VDC.
Pushbutton colorsymbol: R: red, Y: yellow; PY: pure yellow
G: green, A: blue; PW: pure white; B: black *2.
Item: Momentary operation (Self-resetting).
Separate Construction with.
Cylindrical 16-dia. Body.
Miniature design of 28.5 mm, the smallest class in the industry OMRON 61F-WLA.
Detachable Switch.
The same contacts can be used for both standard loads and microloads 61F-WLA
Easy-to-wire terminal arrangement.
Certified for EN 60947-5-1. Type: rectangle.
Screen mode: level 2.
Output: DPDT.
Power supply voltage: DC24V.
Contact type: standard load (AC250V, 3A; DC30V, 3A).
Operation: instantaneous action (auto reset).
Operating above color: blue OMRON 61F-WLA.
Operating under the color: green.
In the touch and the ability to protect than OMRON''s previous models have improved.
The micro volume design of 23mm is realized.
Micro design and unique combination of soft sensing.
LED has five colors (red, yellow, green, white, and blue).
Built in basic switch improves touch.
Built in basic switches in the previous model based on the OMRON to improve the protection OMRON 61F-WLA.
Chip LED to produce a uniform surface brightness.
From the front panel installation, more convenient. Type: 1A contact type.
Shape: square.
Terminal shape: solder terminal.
Action: instantaneous.
Display mode: do not display.
Operation Department color: gray OMRON Water Leak Alarm/Detector.
Large capacity compact type push button switch.
Can also be used as a power switch with a large capacity cut OMRON Water Leak Alarm/Detector.
Can be switched from micro load (minimum applicable load 1mA DC5V) to large capacity load. Ratings: Standard load; 5 A at 125 VAC.
Cable: VCTF oil-resistant cable *1.
Actuator: Roller lever, high sensitivity.
Cable length : 3 m.
Compact Limit Switch That''s Also.
Thin and Highly Sealed.
Approved by EN, UL, CSA, and CCC (Chinese standard) OMRON Water Leak Alarm/Detector.
(Ask your OMRON representative for information on approved models.)
Sealing characteristics that meet IEC IP67 degree of protection.
Triple-sealed construction:
Plunger section sealed via nitrile rubber packing seal and,
diaphragm; switch section sealed via nitrile rubber cap;
cable entrance sealed via encapsulating material.
Cable lengths of 3 and 5 m available on standard models 61F-WLA.
Models also available with UL and CSA-certified cables.
Multiple mounting possible with Switches with Plungers.
Models with red LED indicators added to series for easy,
connfirmation of operation OMRON 61F-WLA.
(Set by default to light for non-operation.)
VCTF oil-resistant cables with CE marking.
(Applicable only to standard models.)


...More relevant models >>>>