K8DS-PH Series Relay Using Voltage Detection Method OMRON K8DS-PH Series

Time specification: Inverse type.
Current setting range: 50 to 160 A.
Operating voltage: 100/110/120 VAC.
Resetting method: Manual.
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage OMRON K8DS-PH Series.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase K8DS-PH Series
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easily because operation time,
is indicated from the start of operation.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, and load conditions OMRON K8DS-PH Series. Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
before using the K2CM. Appearance: insert type.
Control supply voltage: AC100/110/120V.
Action elements: overload detection.
Action characteristic: lock, instant action type OMRON K8DS-PH Series.
Especially suitable for single phase motor over current protection.
Can be used for motor overload protection, common single-phase circuit of the AC current detection.
A variety of models, such as anti time limit characteristics, lock time, instantaneous action, etc OMRON Phase-sequence Phase-loss Relay. , are provided,
The product is rich in variety, and can be effectively protected, detected and controlled according to the actual situation OMRON Phase-sequence Phase-loss Relay.
When the current is large, the input resistance of the CT or the relay part is not needed, and the use is simple.
Because it is a plug-in, installation, disassembly, wiring and other operations are very simple. Shape: DIP straight terminal.
Pole number: 26.
Pole pole number: 1 OMRON Phase-sequence Phase-loss Relay.
Minimum packing unit: 60.
Printed board connector core, MIL specification standard.
Through the use of new productivity design, high reliability and low price synchronization.
A box type plug (XG4C) which is convenient for saving space is provided in the province.
A press type plug (XG4E) capable of using the relay is provided.
Will be the company''s loose wire connector (XG5) - sspecific plug (XG8) and PCB type K8DS-PH Series.
(XG2) combined use of various types of packaging can be achieved.
Suitable for the company''s own development of a simple locking lever can make the unique plug (XG8) and,
Box type plugs (XG4C) can also be locked OMRON K8DS-PH Series.
MIL specification (MIL-C-83503) standard.
Standard product conforms to the UL specification (No. E103202 File) certified products.