LK Automation Limited
Home >> Products >> OMRON >> Power/other peripheral devices >> Power / equipment protection equipment >> Protective equipment for equipment >> K2CM-Q2LSA OMRON K2CM-Q2LSA Operating voltage: 200/220/240 VAC Motor Protective Relay

K2CM-Q2LSA OMRON K2CM-Q2LSA Operating voltage: 200/220/240 VAC Motor Protective Relay

Brand: OMRON
Name: Motor Protective Relay
Model: K2CM-Q2LSA
Time specification: Instantaneous type.
Current setting range: 2 to 8 A.
Operating voltage: 200/220/240 VAC.
Resetting method: Automatic (See note.).
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase.
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easily because operation time,
is indicated from the start of operation.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, and load conditions. Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
before using the K2CM.

Cable specifications: Oil-resistant Polyurethane Cable.
Cable length L: 2 m.
Cable outer diameter: 6 mm.
Angled Connectors.
Minimum order: 5.
UL: --.
Round Water-resistive Smartclick.
Connectors That Reduce Installation Work.
A newly developed lock mechanism that is compatible with round M12 connectors OMRON K2CM-Q2LSA.
Simply insert the Connectors, then turn them approximately 1/8 of a turn to lock K2CM-Q2LSA
A positive click indicates locking.
Features the same degree of protection (IP67) as M12 connectors.
A full line-up of models is planned.
Connectors with Cables are UL approved. Type: Static.
Number of digits: 4.
Compact (Two-, Three-, or Four-digit) S2-series,
Added to Static Mother Board.
Models OMRON K2CM-Q2LSA.
Easily connect a M7E Digital Display without soldering.
Two-, three- and four-digit Mother Boards are available for,
connecting M7E Digital Displays and, by using two Mother,
Boards, two- to eight-digit displays are possible.
The depth of the Mother Board with M7E Digital Display,
Units is only 58 mm, ideal for mounting to compact or thin control panels.
Connecting to OMRON''s PLCs via dedicated PLC cables,
(sold separately) (refer to M7E Options) OMRON K2CM-Q2LSA. Rated voltage: 100 V.
Permitted voltage fluctuation range: 85% to 110% rated voltage.
Frequency: 50/60 Hz.
Rated rotational speed: 50 Hz, 2300 r/min; 60 Hz, 2600 r/min.
Maximum flow rate: 50 Hz, 1 OMRON Motor Protective Relay. 6 m3/min; 60 Hz, 1.9 m3/min.
Maximum static pressure: 50 Hz, 41 Pa; 60 Hz, 43 Pa.
Noise: 50 Hz, 44 dB; 60 Hz, 47 dB.
Weight: Approx OMRON Motor Protective Relay. 2260 g.
Comprehensive Lineup of Single,
Double, and Triple Axial Fans with,
Easy One-step Mounting.
Mounts in a square cutout and conceals the hole-cut to,
simplify installation work.
Cover can be set to open either upward or downward for,
convenience in confined spaces.
Enhanced accessories (finger guard, filter, plug cord,
mounting screws) OMRON Motor Protective Relay.
Optional Replacement Filter and Vent Attachment.
The lineup includes Single, Double, and Triple Box Fans,
with eight models with plastic blades and eight models with,
metal blades. Specifications: Connector with DC line connected(For parallel operation).
Number of Connectors: 10 Connectors (See note 4.).
Block-type Switch Mode Power Supply That.
Mounts to DIN Rail.
One model covers 30 to 120 W (12-V models).
One model covers 60 to 240 W (24-V models).
Easy creation of multi-power supply confiigurations with different,
output power supplies connected together (5-V, 12-V, and 24-Vmodels) K2CM-Q2LSA.
Improve power supply system reliability by creating N+1 redun,
dant systems (12-V and 24-V models).
RoHS-compliant.
Input conditioons: 80 to 370 VDC supported for DC input too,
(EC Directives and safety standards are not applicable OMRON K2CM-Q2LSA. )
Operating temperatures to –20°C (24-V models).


...More relevant models >>>>