C200HW-BC051 OMRON C200HW-BC051 CPU Backplane

Model: C200H-OD216.
No. of points: 8 pts.
Specifications: 0.8 A, 24 VDC. source type (PNP). with load short protection.Name: SYSMAC LINK Co-axial Power Supply.
Model: C200HS-SLK22.
Provided with a 2-m cable for ladder programming.Model: C200HS-MP16K.
Capacity: 16K words/32K words.Name: Temperature Control Module OMRON C200HW-BC051.
Model: C200H-TC003.
Sensor: Thermocouple: R, S, K(CA), J(IC), T(CC), E(CRC), B, N, L(IC), U(CC) C200HW-BC051
Control output: Current output.Model: C200H-BC101-V2.
No. of I/O slots: 10 slots.Model: C200H-DA001.
Input points: 2.
Voltage input: 1 to 5V or 0 to 10 V.
Current input: 4 to 20 mA.No. of I/O slots: 8 slots.Model: C200H-ID501.
No. of inputs: 32 pts.
Specifications: 5 VDC.Name: Host Link Module OMRON C200HW-BC051.
Model: C200H-LK201-V1.
Communication ports: 1 RS-232C, 25 pin female.Model: C200H-ID217.
No. of points: 32 pts.
Specifications: 24 VDC.
Weight: 250g max.8 pts, 1.2 A, 120 VAC8 pts, No-voltage contact. NPN.Model: C200HW-COM01.
Specifications: Communications port for Controller Link, SYSMAC LINK Units.For C200H-PRO27-E Hand-held Programming Console ming Console.
4m.For 1 Unit.Model: C200H-OC222N OMRON C200HW-BC051.
No. of points: 12 pts.
Specifications: 2A, 250VAC/24VDC(For resistive loads).Model: C200H-AD002.
Input points: 8.
Voltage input: 1 to 5 V, 0 to 10 V, or –10 to 10 V.
Current input: 4 to 20 mA.Model: C200H-MD215 OMRON CPU Backplane.
No. of I/O pts: 16 inputs, 16 outputs.
Specifications: 24VDC.For C200H-PRO27-E Hand-held Programming Console ming Console.
4m.For 10-slot Backplane.Connects SYSMAC LINK Unit, Controller Link Unit to CPU Unit OMRON CPU Backplane.
For 1 Unit.Name: Space Module.
Model: C200HW-CLK21.
Space Module: For I/O Module slots.100 to 120/200 to 240 VAC (switchable), Wired.UM: 15.2K words.
DM: 6K words.
EM: 6K words.
Instruction processing time (basic instructions): 0.15 µ OMRON CPU Backplane. s min.
No. of I/O points: 1, 184 points.
Max. no.of con-necting Expansion I/O Racks: 3 Racks.
Max. no. of connecting High-density I/O Units(i.e., Group-2): Unavailablee C200HW-BC051.
Max. no. of con-necting Special I/O Units: 10.
RS-232C: NO.Capacity: 16K word.
Access time: 150ns.
When using SYSMAC-CPT, can not be written in EPROM.
To write a program to the EPROM, use the standard PROM writer.
Before the EPPPROM memory card into the CPU, to connect the EPROM to the EPROM memory card OMRON C200HW-BC051.
If you remove the EPROM memory card from the CPU,
Will not lose its data.