CA5-DCCNL-01 Proface CA5-DCCNL-01 DC power adapter

A veneer, for the GP4000 series back loading models of full flush (white, 1)Suitable for A/B+ Type modelsTouch screen anti ultraviolet protective film (1 pieces).Input / output hybrid I/O modules, including 16 point NPN/PNP input and 16 point NPN transistor outputFor the DVI input to GP30005.7 inches, for the protection of the man-machine interface from oil and chemical pollution (5 / set) Proface CA5-DCCNL-01 CA5-DCCNL-01 Connector for connecting DC power cord. (right angle, 5 / set)Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface.Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interfaceFor connecting the GP3000H cable connector and the external output port, the output of the following connectors: serial: D-Sub 9 pin (convex), Ethernet: Jack RJ-45 (Modular), other: terminal block Proface CA5-DCCNL-01. 256MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card.Used to convert RGB to DVI-A10.4 inch screen protective cover (1 pieces)Touch screen anti ultraviolet protective film (1 pieces) Proface CA5-DCCNL-01. LT fasteners installed on the control panel (4 / set)7 inch widescreen display module installed on the senior panel adapter GP-2400, GP-3400 and GP-4400 series of holes.COM1 interface with the cable (RS-232C), used to connect directly to the CPU series PLC FX (not the same time using the programming controller)Used to connect the 2-Port adapter to GP4000The main controller is connected to the host computer interface (can be switched between RS-232C and RS-422) using the isolation module Proface DC power adapter Proface DC power adapter. Screen protection cover (1 pieces) for protecting screen against pollution of man-machine interfaceUsed to prevent accidental operation. Includes 3 mounting screws Proface DC power adapter. Slave station module for connecting support for CANopenOne end is a loose wire, which is used to caarry out RS-232C connection between the host and LT CA5-DCCNL-01. Screen protection cover (1 pieces) for protecting screen against pollution of man-machine interfaceDurable interface cable for connecting GP with external devices (such as the main controller), equipped with a universal filter Proface CA5-DCCNL-01. The man-machine interface directly connected MITSUBISHI electric PLC FX series CPU programming port.