CA3-BUSCVR-01 Proface CA3-BUSCVR-01

Touch screen anti ultraviolet protective film (1 pieces).Connector for connecting DC power cord (5 / set).Expansion module for the GP3000 access to the DeviceNet network and communication with the DeviceNet master stationConnector for connecting a serial port (1)Converting SIO to RS-422 terminal blockThe MITSUBISHI Q series PLC is connected to GP, length: 5 m Proface CA3-BUSCVR-01. For the operation screen (5 pieces) (GP3000H standard) CA3-BUSCVR-01Screen protection cover (1 pieces) for protecting screen against pollution of man-machine interface5.7 inches, for the protection of the man-machine interface from oil and chemical pollution (5 / set).Touch screen anti ultraviolet protective film (1 pieces).Length: 5 meters.For the man-machine interface hanging in the neck lanyard Proface CA3-BUSCVR-01. Input / output hybrid I/O modules, including 32 point NPN/PNP input and 32 point NPN transistor output12 way 4 digital signals into analog signals and output resultsApplicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).Stop pin, prevent cable connection loose USB cable fastening clip (Type-A*1 USB, Mini-B, each 1 interface), used to adjust the thickness of the mounting panel 2mm gasket (1 pieces) Proface CA3-BUSCVR-01. Used to prevent disconnection of the connection (1 interface, 5 / set).12.1 inches, replaced by a host of backlight (1).The man-machine interface directly connected MITSUBISHI electric PLC FX series CPU programming port Proface Extended bus interface. With a fixed screw of the pre USB protection cover, in compliance with IP66F, IP67F, 1/4X Type only indoor use /13 or ATEX certification (5 / set) Proface Extended bus interface. 10.4 inches and above, used to connect the power cord (5 / set).Slave station module for connecting support for CANopenUsed to install the human machine interface to the fixed panel (2 / cover).Input / output hybrid I/O modules, including 16 point NPN/PNP input and 16 point PNP transistor outputFor 5 Proface Extended bus interface. 7 inch models, prevvent cable loose from the USB cable fastening clip (5 / set) CA3-BUSCVR-01. A veneer, for the GP4000 series back loading models of full flush (white, 1)Backup battery for time and data backup (1).Connector for connecting DC power cord (5)Suitable for A/B+ Type modeelsI/O module, including 32 point NPN/PNP inputDisposable film (5 sheets / sets) for protecting screen against contamination of human computer interface