CA3-DFS12-01 Proface CA3-DFS12-01 

With the installation of screws (4 / sets), for the GP4000 series back mounted to the fixed panel models. (2 / set)A veneer, for the GP4000 series back loading models of full flush (white, 1)NETWORK FLEX 64 point DIO connector terminal block, (including 2)LT4000M (module type DIO), NPN output, DC24V (host) Proface CA3-DFS12-01. 15 inches, GP installed to the hard panel to provide dust and moisture proof function CA3-DFS12-01Used to convert the USB interface to the serial interface (RS-232C). A modem or bar code reader that can be connected to support RS-232C.Length: 5 meters.Standard interface cable for connecting GP and external devices (such as the main controller), with a universal filter.
Length of 5 meters. 4.3 Inch Touch Screen anti UV protective film (1 pieces) Proface CA3-DFS12-01. Connector for connecting DC power cord (5)When the man-machine interface is installed to the hard panel to provide dust and moisture proof function (1)Connector for connecting a serial port (1)Used to connect the GP2000H series RS-422 conversion adapter with GP3000H, with D-Sub connectors.
Length: 3 meters. For the man-machine interface hanging in the neck lanyard Proface CA3-DFS12-01. Fitting on NETWORK FLEX interface. Connecting NETWORK FLEX communication cable. (5 / set)Used to interface the main machine output serial port (D-sub 9 pin concave type) directly connected to the RS-422 terminal block.Used to output the image signal from the host computer to GPLT4000M (module type DIO), PNP output, DC24V (host) Proface Screen protection film. 7 inch widescreen display module installed on the senior panel adapter GP-2400, GP-3400 and GP-4400 series of holes Proface Screen protection film. Durable cable for connecting GP3000H adapter and GP3000H.GP2500S useSome types of PLC are not connected. Length: 5 meters.5.7 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set) Proface Screen protection film. The main controller is connected to the host computer interface (can be switched between RS-232C and RS-422) using the isolation module CA3-DFS12-01. COM1 interface with the cable (RS-232C), used to connect directly to the CPU series PLC FX (not the same time using the programming controller)Touch paneel operation for RGB input modules (Master - from: Mini-B)Connect to the SIEMENS PLC or MPI, used to connect the commercial type PROFIBUS connector COM2