CA3-CFCALL/512MB-01 CF card Proface CA3-CFCALL/512MB-01

For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters.Used to connect the 2-Port adapter to GP4000Used to connect the GP2000H series RS-422 conversion adapter with GP3000H, with D-Sub connectors.
Length: 3 meters. Input / output hybrid I/O modules, including 16 point NPN/PNP input and 16 point PNP transistor outputFitting on NETWORK FLEX interface Proface CA3-CFCALL/512MB-01 CA3-CFCALL/512MB-01 Connecting NETWORK FLEX communication cable. (5 / set)Touch screen anti ultraviolet protective film (1 pieces).10.4 inches (TFT), the replacement of the host backlight (1).Portable GP2000H series models accessories, RS-422 cable with D-Sub connector (10 meters).Transmission screen data, such as the USB cable, PC (Type-A USB) to the man-machine interface USB (Type-A)SD memory card (4GB, MLC, CLASS4) Proface CA3-CFCALL/512MB-01. Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine.4.3 Inch Touch Screen anti UV protective film (1 pieces).Screen protection cover (1 pieces) for protecting screen against pollution of man-machine interfaceUsed to interface the main machine output serial port (D-sub 9 pin concave type) directly connected to the RS-422 terminal block Proface CA3-CFCALL/512MB-01. 10.4 inch TFT models applicable parts, for the 10.4 inch man machine interface (TFT) into the 10 Proface CF card. 4 inch GP2500 (TFT) in the installation of the required accessories.For connecting GP operation data with D-Sub RS-232C and power /DIO terminals.Used to convert the USB interface to the serial interface (RS-232C) Proface CF card. A modem or bar code reader that can be connected to support RS-232C.The main body module and the separate display module are used for connecting the main machine module and the separate display module in the DIN guide rail.LT seal on the control panel Proface CF card. For 5.7 inch models, for fixing the hooks of the three EX modules.A veneer, for the GP4000 series back loading models of full flush (white, 1)Touch panel operation for RGB input modules (Master - from: Mini-B)For 5 CA3-CFCALL/512MB-01. 7 inch models, connect the connector to the DIO interface. For connecting external I/O devices. (5 / set)Connect to the SIEMENS PLC or MPI, used to connect thee commercial type PROFIBUS connector COM212 Proface CA3-CFCALL/512MB-01. 1 inches /10.4 inches (STN), the GP installed to the hard panel to provide dust and moisture proof function.