CPM2C-SRT21 Manual OMRON CPM2C-SRT21 Installation Guide

I/O Cable (for I/O to Interface Racks) 0.6 m (L) CV500-CN612C1000H-CP CPU 62 k words 1024 pts C1000H-CPU01.Output method: Analog resolution: 1/6000.
Analog Outputs: 4.A memory card suitable for Phoenix PCM+3.2 and one of thefollowing Bus Connection Units is required. No PC card is provided with the Unit OMRON CPM2C-SRT21 Installation Guide. Name: Screw Terminal Block with SSR Outputs.
Specifications: Outputs;
16 outputs; SSR CPM2C-SRT21
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site OMRON CPM2C-SRT21 Installation Guide.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. Name: Three-tier Screw Terminal Block.
Specifications: Inputs; 8 inputs; PNP;
With Short-circuit and,
Disconnected Line Detection.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet OMRON CPM2C-SRT21 Installation Guide.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. Model: C200H-OD213.
No. of points: 8 pts.
Specifications: 2.1 A, 24 VDC.Control specifications: voltage output / pulse train output.
Axis of control: 1.
Location data: 200.
Connection with servo motor drive,
The location data is transmitted by PC to carry out high precision positioning.
Can set the number of different types of products and location parameters, and can monitor the operation process online.
Equipment operation is flexible and convenient, can achieve start and pause,
Automatic and maanual mode switching, counting and zero, cylinder pressure time adjustment, etc CPM2C-SRT21 Manual. .
Screw automatic discharge, feeding, fixed, the machine is automatically completed by one time, without manual assistance.
High speed production beatt, can achieve a single station speed of not less than 1-1 CPM2C-SRT21 Manual. 5 seconds / piece.
Positioning accuracy is high, the position error is not more than 0.02 mm.