CPM2C-20CDT1M-D Manual OMRON Programmable Terminals CPM2C-20CDT1M-D Simple Operation Handbook

Model : CVM1-MP201-V2.
Position Control Unit (NC222) for.Name: e-CON Connectors.
Specifications: Inputs; 32 inputs; PNP;
With Short-circuit and,
Disconnected Line Detection.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced OMRON Programmable Terminals Simple Operation Handbook.
Bit-level I/O distribution reduces,
wiring in the system CPM2C-20CDT1M-D
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. I/O Cable (for I/O to Interface Racks) 2 m (L) CV500-CN222Unit type: CJ1 Special I/O Units OMRON Programmable Terminals Simple Operation Handbook.
Product name: Analog Output Unit.
I/O points: 2 outputs;
Signal range selection:
Set separately for each output.
Signal range, Resolution: 1 to 5 V,
0 to 5 V, 0 to 10 V, -10 to 10 V,
4 to 20 mA; 1/4,00.
Conversion period: 1 ms/point.
Accuracy at ambient temperature of 25°C:
Voltage: ±0 OMRON Programmable Terminals Simple Operation Handbook. 3% of F.S. Current: ±0.5% of F.S.
External connection: Removable terminal block.
External power supply: 24 VDC +10% -15%, 140mA max.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.12A; 24V, 0 CPM2C-20CDT1M-D Simple Operation Handbook. 14*3.
Standards: UC1, N, L, CE.
Consistent Microsecond Throughput:
Models with Direct Conversion Join the Lineup CPM2C-20CDT1M-D Simple Operation Handbook.
Analog Input Units for converting analog input,
signals into binary data.
Analog Output Units for converting binary ,
data into analog output signals. Unit type: CS1 Basic I/O Units.
Product name: DC Input/Transistor Output Unit.
Specifications: 24 VDC, 6 mA 32 inputs.
Mountable Racks: CPU Rack, CS1W-BC,
@@3, Yes, @@2, Yes;
C200HX/HG/HE Expansion I/O Rack, No CPM2C-20CDT1M-D Simple Operation Handbook.
CS1 Expansion Rack, CS1W-BI,
@@3, Yes, @@2, Yes;
CS1 Long distance Exppansion Rack, Yes;
SYSMAC BUS Slave Rack, No CPM2C-20CDT1M-D Manual.
Words required: 2 input words and 2 output words.
Current consumption: 5V system, 0.27A;
26 V system, --.
Standards: U, C, N, L, CE.
Multi-appplication Controllers:
From High-performance Machine C,
Highly Reliable Process Control OMRON Programmable Terminals Simple Operation Handbook. H-PCF cable for Controller Link Units, cable length: 50 cm.