LK Automation Limited
Home >> Download >> MITSUBISHI >> Manual Download >> MITSUBISHI GT2708-VTBD-GF Manual GT2708-VTBD-GF Microcomputers, MODBUS/Fieldbus Products, Peripherals Connection Manual

MITSUBISHI GT2708-VTBD-GF Manual GT2708-VTBD-GF Microcomputers, MODBUS/Fieldbus Products, Peripherals Connection Manual

Product model: GT2708-VTBD-GF
Name: HMI
Brand: MITSUBISHI
Sort: Microcomputers, MODBUS/Fieldbus Products, Peripherals Connection Manual
File language: English
File size: 14.39MB
For GT1030/GT1020 (used for operating system project data transfer) without power supply.
Applicable model: GT10. Cable length: 3m.
The connection between Q/LCPU and GOT/ personal computer /GTSoftGOT1000 (D-SUB9).
Applicable models: GT16, GT15, GT11, GT10, GT27, GT25, GT23, GT21. Used to prevent accidental shutdown switch GT2708-VTBD-GF Connection Manual.
Applicable model: hand held GOT. Bus cables used for GOT1000 to replace the ferrite cores used in the existing GOT-A900 bus cables GT2708-VTBD-GF
Applicable models: GT16, GT15, GT11, GT27, GT25. "Series introduction: with a variety of advanced features of the compact model.
Screen size: 5.7 inches.
Display color: 256 color or more color.
Mounting type: panel mounting type.
Resolution: QVGA (320 x 240) GT2708-VTBD-GF Connection Manual.
Display device: STN monochrome.
Host frame color: black.
Power type: DC24V.
Communication interface: QnA/ACPU/ for CPU motion controller (A) built-in bus connection interface.
The first characteristic of touch screen:
Transparent, it directly affects the visual effect of touch screen.
The problem of transparency is the degree of transparency, infrared technology, touch screen and surface acoustic wave touch screen is separated by a layer of pure glass,
Transparency can be considered a leader, the other touch screen this is a good scrutiny, transparency",
The touch screen industry, is a very broad concept, many touch screen is a multilayer composite film,
It''s not enough to generalize its visual effect with only a little transparency,
It should include at least four characteristics: transparency, color distortion, reflection and clarity, but also,
For example, the degree of reflection, including the degree of specular reflection and diffraction,
But the touch screen surface diffraction reflection has not reached the extent of the CD disk,
For users, these four metrics are basically enough GT2708-VTBD-GF Connection Manual. "Series: multimedia and advanced features and features of a variety of high-performance models.
Screen size: 15 inches.
Display color: 256 color or more color.
Installation type: compatible with multimedia and video /RGB.
Resolution: XGA (1024 x 768).
Display device: TFT color (high brightness, wide viewing angle).
Host frame color: black.
Power type: DC24V.
Communication interface: with built-in RS-422.
High performance models with multimedia and advanced features and functionality (including embedded communications capabilities).
User storage capacity: 15MB (GT16__-VNB__:11MB).
With HOST USB and device USB port.
Standard Ethernet, RS-422/485 and RS-232 ports.
Support multimedia and video /RGB units.
Analog touch panel.
Do not let the touch screen surface with water drops or other soft things stick to the surface,
Otherwise, the touch screen is easy to mistake that there is a hand touch caused by surface acoustic wave screen is not allowed.
In addition to cleaning the dirt on the surface of the touch screen,
You can use a soft dry cloth or a cleaning agent to clean out the center of the screen carefully,
Or use a dry soft cloth dipped in industrial alcohol or glass cleaning fluid to clean the touch screen surface.
Touch screen response is slow if you use a hand or other touch to touch the surface acoustic wave touch screen,
This shows that it is likely that the touch screen system has been obsolete, the internal clock frequency is too low,
Or because there is water in the surface of the touch screen to make the touch screen mobile, rapid response recovery,
To replace or upgrade the system must, or use drry cloth touch screen on the surface of the water GT2708-VTBD-GF Manual .
If the user is operating the touch screen, the direction of the touch move is to the left,
But the cursor of the system moves to the right,
The failure may be due to the conneection of the control box and the touch screen connected to the connector or the touch screen,
Users as long as the direction of the re exchange of it GT2708-VTBD-GF Manual .
Related products
MITSUBISHI
8.4 Inch Touch Screen
GT2708-VTBD
MITSUBISHI 8.4 Inch Touch Screen GT2708-VTBD
Function: high performance and low price in t
MITSUBISHI
8.4 Inch Touch Screen
GT2708-STBD-GF
MITSUBISHI 8.4 Inch Touch Screen GT2708-STBD-GF
Function: high performance and low price in t
MITSUBISHI
8.4 Inch Touch Screen
GT2708-STBA
MITSUBISHI 8.4 Inch Touch Screen GT2708-STBA
Function: high performance and low price in t
MITSUBISHI
8.4 Inch Touch Screen
GT2708-STBD
MITSUBISHI 8.4 Inch Touch Screen GT2708-STBD
Function: high performance and low price in t