LK Automation Limited
Home >> Download >> MITSUBISHI >> Manual Download >> MITSUBISHI GT2708-STBD SAFETY PRECAUTIONS GT2708-STBD Manual

MITSUBISHI GT2708-STBD SAFETY PRECAUTIONS GT2708-STBD Manual

Product model: GT2708-STBD
Name: General Description
Brand: MITSUBISHI
Sort: SAFETY PRECAUTIONS
File language: English
File size: 0.77MB
Cable length: 5.0m.
For the connection between QnAS/AnSCPU/ motion controller A7GT-CNB (A Series) and CPU.
Applicable models: GT16, GT15, GT11. RS-232 to RS422 conversion unit (RS-422 connector: 9-pin).
Applicable models: GT15, GT16. Cable length: 3m.
The connection between the CC-LINK interface unit and the smart GOT GT2708-STBD SAFETY PRECAUTIONS.
Applicable model: HandyGOT. A series of high performance models that are widely used in network or single machine work environments GT2708-STBD
Screen size: 10.4 inches.
Display color: 256 color or more color.
Mounting type: panel mounting type.
Resolution: SVGA (800 x 600).
Display device: TFT color (high brightness, wide viewing angle).
Host frame color: black.
Power type: DC24V.
Communication interface: with built-in RS-422 GT2708-STBD SAFETY PRECAUTIONS.
Ideal model for high performance in a network or independent operation environment.
User storage capacity: 9MB (GT15__-VNB_:5MB).
Device USB port.
Standard RS-232 interface.
Support video /RGB unit.
If the capacitive touch screen is in the middle of the operation, the display resolution or display mode of the touch screen is changed again,
Or the refresh rate of the touch screen controller is adjusted by itself, and the cursor and the touch point can not be felt when the cursor is not corresponding to the touch point,
Must be re calibrated to the touch screen system GT2708-STBD SAFETY PRECAUTIONS.
In order to ensure the normal operation of the touch screen system, in addition to ensure the proper installation of the system software,
Must also remember that in a host do not install two or more than two kinds of touch screen driver,
This will cause the system to run in conflict, so that the touch screen system can not be used properly. 4GB flash ROM.
Applicable models: GT16, HandyGOTSeries introduction: set a number of basic functions in a small body model.
Screen size: 4.5 inches.
Display color: monochrome.
Mounting type: panel mounting type.
Resolution: 288 * 96.
Display device: STN monochrome.
Host frame color: white.
Power type: DC5V.
Communication interface: with built-in RS-422.
Set a number of basic functions in a compact type.
GT1055/GT1050/GT1045/GT1040:
User storage capacity: 3MB.
Device USB port.
The standard RS-422/485 and RS-232 interface.
GT1030/GT1020:
User storage capacity: 1.5MB (gt1030) /512kb (gt1020).
Three color LED backlight design, equipment status at a glance.
The standard RS-422/485 or RS-232 interface.
Touch screen, also known as touch screen, touch panel, is a kind of induction type lliquid crystal display device can receive contacts and other input signals,
When touching the screen button on the screen,
The tactile feedback system on the screen can drive various connecting devices according to the pre prograammed program,
Can be used to replace the mechanical button panel, and by the liquid crystal display screen to create the image of the effect of birth GT2708-STBD Manual GT2708-STBD Manual .
Related products
MITSUBISHI
8.4 Inch Touch Screen
GT2708-VTBA-GF
MITSUBISHI 8.4 Inch Touch Screen GT2708-VTBA-GF
Function: high performance and low price in t
MITSUBISHI
8.4 Inch Touch Screen
GT2708-VTBD-GF
MITSUBISHI 8.4 Inch Touch Screen GT2708-VTBD-GF
Function: high performance and low price in t
MITSUBISHI
12.1 Inch Touch Screen
GT2712-STBD
MITSUBISHI 12.1 Inch Touch Screen GT2712-STBD
Function: high performance and low price in t
MITSUBISHI
12.1 Inch Touch Screen
GT2512-STBD-GF
MITSUBISHI 12.1 Inch Touch Screen GT2512-STBD-GF
Function: high performance and low price in t