GT2712-STBA-GF Manual MITSUBISHI GRAPHIC OPERATION TERMINAL GT2712-STBA-GF Non-Mitsubishi Products 2 Connection Manual

Series introduction: set a number of basic functions in a small body model.
Screen size: 3.7 inches.
Display color: monochrome.
Mounting type: panel mounting type.
Resolution: 288 * 96.
Display device: STN monochrome.
Host frame color: black.
Power type: DC5V.
GT10 backlight: white backlight.
Communication interface: with built-in RS-422 MITSUBISHI GRAPHIC OPERATION TERMINAL Connection Manual.
Set a number of basic functions in a compact type GT2712-STBA-GF
GT1055/GT1050/GT1045/GT1040:
User storage capacity: 3MB.
Device USB port.
The standard RS-422/485 and RS-232 interface.
GT1030/GT1020:
User storage capacity: 1.5MB (gt1030) /512kb (gt1020).
Three color LED backlight design, equipment status at a glance.
The standard RS-422/485 or RS-232 interface.
Touch screen, also known as touch screen, touch panel, is a kind of induction type liquid crystal display device can receive contacts and other input signals,
When touching the screen button on the screen,
The tactile feedback system on the screen can drive various connecting devices according to the pre programmed program,
Can be used to replace the mechanical button panel, and by the liquid crystal display screen to create the image of the effect of birth MITSUBISHI GRAPHIC OPERATION TERMINAL Connection Manual MITSUBISHI GRAPHIC OPERATION TERMINAL Connection Manual. 128MB flash ROM.
Applicable models: GT16, GT15, GT11, HandyGOT. Protective film for 15 inch screen.
Scrub, 5.
Applicable model: GT15 GT2712-STBA-GF Connection Manual. Cable length: 3m.
The connection between the CC-LINK interface unit and the smart GOT.
Applicable model: HandyGOT. RS-232 to RS422 conversion unit (RS-422 connector: 25-pin) GT2712-STBA-GF Connection Manual.
Applicable models: GT15, GT16. For the GT1675M-VTB.
Applicable model: GT16. Function: high performance and low price in the middle end model.
Picture size: 8.4 inches.
Resolution: VGA.
Display: TFT color.
Open frame type.
Panel color: white.
Power type: AC100~240V GT2712-STBA-GF Connection Manual.
Middle end model of high performance and low price.
GT25 standard supports SD memory card and standard equipped with Ethernet, RS-232, RS-422/485, host/device USB interface.
Even in the log, script, alarm, soft component data transmission, such as high load processing period, but also to achieve smooth operation of the screen.
Connect GOT front USB interface and computer,
Can be through the FA, the GOT machine programming, start and adjust the operation,
Save the trouble of opening the control cabinet and changing the cable.
1, USB interface: device USB machine (Mini-B USB)
Can connect to the computer to transfer data.
2, USB interface: host USB (USB-A)
USB data can be transmitted through the USB memory or read log data, such as the GOT data, but also can be connected to the use of the mouse, keyboard.
3, the extension of the interface
Communication module and optional module can be installed.
4, Ethernet interfface
Up to 4 different manufacturers can be connected at the same time
FA machine GT2712-STBA-GF Manual .
5, RS-232 interface
Can connect all kinds of FA machine, bar code reader, serial printer.
6, RS-422/485 interfface
Can be connected to a variety of FA machines, bar code reader MITSUBISHI GRAPHIC OPERATION TERMINAL Connection Manual.
7, SD memory card slot
Can save alarm and log data, such as a large number of data.