ZC9CBQ31 Proface ZC9CBQ31 MITSUBISHI motor Q PLC series CPU connection cable (3 m)

The main controller is connected to the man-machine interface for MPI communicationDisposable film (5 sheets / sets) for protecting screen against contamination of human computer interface.To prevent the connection of disconnected USB cable fastening clips (Type-A USB, 1 interface, 5 / set)Touch screen anti ultraviolet protective film (1 pieces) Proface ZC9CBQ31. Used to output the image signal from the host computer to GP5 ZC9CBQ317 inches, installed to provide the function of dust and moistureThe man-machine interface directly connected MITSUBISHI electric PLC FX series CPU programming port.When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function. (1)LT fasteners installed on the control panel (4 / set)Slave station module for connecting support for CANopen3 Proface ZC9CBQ31. 8 inches, GP installed to the hard panel to provide dust and moisture proof function.(serial communication terminal adapter is included in the product package)GP3000H replacement label (5 sheets / set)256MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card Proface ZC9CBQ31. Protection for GP rear connectors (large and small for each of the 1).COM2 terminal adapter for communication through the RS-422/485 connectionInput / output hybrid I/O modules, including 16 point NPN/PNP input and 16 point PNP transistor outputTransmission screen data, such as the USB cable, PC (Type-A USB) to the man-machine interface USB (Type-A)Connector for connecting DC power cord (5)7 Proface MITSUBISHI motor Q PLC series CPU connection cable (3 m) Proface MITSUBISHI motor Q PLC series CPU connection cable (3 m). 4 inches or larger, for external reset input, NETWORK FLEX communication, audio output. AUX connector, L typeFor connecting the GP3000H cable connector and the external output port, the output of the following connectors: serial: D-Sub 9 pin (convex), Ethernet: Jack RJ-45 (Modular), other: terminal block Proface MITSUBISHI motor Q PLC series CPU connectionn cable (3 m) ZC9CBQ31. Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface.Used to connect the GP2000H series RS-422 conversion adapter with GP3000H, with D-Sub connectors.
Length: 10 meeters Proface ZC9CBQ31. Expansion module for the GP3000 access to the CC-Link network and communication with the CC-Link master station (support for intelligent devices)