LK Automation Limited
Home >> Products >> Proface >> Touch Screen >> ST series >> ST403-AG41-24V(ST403) Memory: EPROM 640KB FLASH Proface ST403-AG41-24V(ST403)

ST403-AG41-24V(ST403) Memory: EPROM 640KB FLASH Proface ST403-AG41-24V(ST403)

Brand: Proface
Name: Small programmable man-machine interface
Model: ST403-AG41-24V(ST403)
Display size: 3.8 inches.
Display type: monochrome LCD.
Display color: black and white (2 gray level) / black and white (8 gray level).
Backlight: LED backlight.
Resolution: 320 x 240 pixels.
Brightness control: 2 level adjustment can be carried out by touch panel.
Contrast control: 8 level adjustment can be carried out through the touch panel.
Memory: EPROM 640KB FLASH.
Serial port: RS-232C/422.
Ethernet port: 10BASE-T.

Input voltage: DC24V.
Screen size: 3.5 inches.
Display type (resolution):65536 color TFT display LCD (QVGA 320 x 240 pixels).
Touch panel type: analog resistance.
Memory: 16MB (internal memory), SRAM320KB (backup memory), SRAM64KB (variable area).
Ethernet interface: No.
Serial port: RS-232C * 1, RS-422/485 * 1 Proface ST403-AG41-24V(ST403).
SD card slot (max 32GB):1.
USB interface: Type-A x (2) USB 1, Mini-B USB (2) x 1 ST403-AG41-24V(ST403)
Replaceable battery: no (rechargeable battery).
Alarm analysis function block: yes.
Panel opening size:
Wide 118.5 x high 92.5mm (+1/0mm).
Panel thickness: 1.6-5mm, chamfer radius is less than R3.
Serial isolation models: there.
Simplify troubleshooting.
Using alarm analysis function, can grasp the cause of the fault in time Proface ST403-AG41-24V(ST403).
Just a few clicks, you can set the alarm analysis screen,
Analysis of the status data of the register related to the alarm.
Remote monitoring and control.
Using remote monitoring software EX GP-Viewer,
Can be from a running PC system Windows remote monitoring of the production scene of the man-machine interface screen. "NPN output type.
Display size: 5.7 inches.
Resolution: 320 x 240 pixels (QVGA) Proface ST403-AG41-24V(ST403).
LCD:TFT.
Color: 65536 color.
Ethernet interface: 1.
Serial port: 1.
CANopen interface: No.
USB (host):1.
USB (device): none.
Built in DIO input: 16 points.
Built in DIO output: 16 points.
Built in AIO input: No.
Built in AIO output: No.
Common DIO:2 point high speed counter (with synchronous output) pulse capture input, pulse output, PWM output Proface Small programmable man-machine interface.
Special DIO: No Proface Small programmable man-machine interface.
Expansion module EX module: up to 3.
Expansion module CANopen module: 63 stations.
Controller memory size: EPROM 132KB FLASH (equivalent to 15000 steps (up to 60000 steps).
CANopen network
LT4000M supports data exchange with a variety of remote devices through the CANopen, easy to achieve economic and easy to use system design Proface Small programmable man-machine interface.
Can choose standard I/O module, also can choose action or control module and other more advanced products in complex application.
Use EX GP-Pro to easily test and debug the project.
EX GP-Pro simulation is a kind of offline simulation function, with the help of this function,
No need to connect the man-machine interface, you can test the operation of the screen and the logic program.
Compact size.
The volume is small but the display is fresh and bright, can create a rich and readable operation picture.
The control function of the whole and the digital I/O, analog I/O, analog temperature input and USB, serial port and Ethernet communication interface.
Integrated design.
Adopt integrative design, compact structure,
When the installation is only required to open a hole in the panel 22mm.
The display module or the control module can be easily replaced when the fault is eliminated.
Using remote monitoring software GP-Viewer or data acquisition software EX Pro-Server,
Can easily monitor the production scene of the man-machine interface screen, or release production orders and real-time data collection.
Flexible installation.
The control module can be installed on the DIN guide rail by using the split installation cable,
And the display module is installed in other locations.
Display module occupies a small space, even if the space is limited, but also can be flexible to install.
Connect various control devices.
Pro-face human machine interface can be connected to a variety of industrial controllers, including PLLC, motion controller, robot and other equipment ST403-AG41-24V(ST403).
Remote HMI Pro-face.
Natural connection production line and tablet PC or smart phone. By adding APP,
True implementation of mobile operations without loss of any operatiional performance Proface ST403-AG41-24V(ST403).
Directly confirm the cause of the failure of the phone, as far as possible not to the scene on the recovery of the machine running. "


...More relevant models >>>>
Related download