Proface ZCACNDCS1 Proface ZCACNDCS1

Apply to GLC-2600/2500LT fasteners installed on the control panel (4 / set)CFast cards (32GB, SLC,) inserted in the CFast slot for storage.LT4000M (module type DIO), NPN output, DC24V (host).Used to display analog RGB (2 channels) on the GP3000Length: 5 meters.Adapter for EX module (5 / set)Input / output hybrid I/O modules, including 32 point NPN/PNP input and 32 point NPN transistor outputUsed to prevent disconnection Proface ZCACNDCS1 ZCACNDCS1 (1 interface, 5 / set)To prevent the connection of disconnected USB cable fastening clips (Type-A USB, 1 interface, 5 / set)5 / setsDigital small keyboard with USB interface.Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface Proface ZCACNDCS1. Cable for connecting GP3000 to various modulesEngineering documents created by the LT interface to download images and logic programming software through the USB interface.Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).Length: 3 metersConnect to the SIEMENS PLC or MPI, used to connect the commercial type PROFIBUS connector COM2Expansion module for the GP3000 access to the CANopen network and communication with the CANopen master stationGP3000H replacement label (5 sheets / set)For the man-machine interface hanging in the neck lanyard Proface ZCACNDCS1. The main controller is connected to the host computer interface (can be switched between RS-232C and RS-422) using the isolation module Proface DC power adapter. NETWORK FLEX 64 point DIO connector terminal block, (including 2)3 / setsTo prevent the connection of disconnected USB cable fastening clips (Mini-B USB, 1 interface, 5 / set)Extension cable for connecting USB (Type-A) interface to front panel Proface DC power adapter. The main controller is connected to the man-machine interface for MPI communicationTouch screen anti ultraviolet protective film (1 pieces) Proface DC power adapter. GP-230/250/270 series is replaced by ST series, the gap filled wiith the opening of the panel5 / setsTransmission screen data of the USB cable, PC (Type-A USB) to the man-machine interface USB (Mini-B) ZCACNDCS1. The MITSUBISHI A series PLC is connected to GP, length: 5 m.12.1 inch screen protective cover (1 pieces)COM1 interface with the cable for direct connection to the CPU series PLC QFor 5 Proface ZCACNDCS1. 7 inch models, for fixing the hooks of the three EX modules.