Home
>> Products
>> MITSUBISHI
>> FX series PLC
>> FX1S series
>> FX1S-10MT-ES/UL MITSUBISHI PLC MITSUBISHI FX1S-10MT-ES/UL
FX1S-10MT-ES/UL MITSUBISHI PLC MITSUBISHI FX1S-10MT-ES/UL
Brand:
MITSUBISHI
Name: PLC
Model: FX1S-10MT-ES/UL
Max input / output points: 10 points.
Supply voltage: 100 - 240VAC.
Input points: 6 points.
Output points: 4 points.
Output type: Transistor (source).
Power consumption (W): 6.
Weight (kg):0.22.
Size (WxHxD) mm:60x90x49.
Host has 10 points (6I/4O), 14 points (8I/6O), 20 points (12I/8O), 30 points (16I/14O) of 4 types.
This type of PLC is mainly used in all of the digital input, digital output control point of the device.
Can be directly connected to the 220V city power, built-in 8K step EEPROM memory, no battery, easy to maintain.
The series transistor output (MT) of the PLC, can be output 2 100KHz pulse, direct drive servo or stepper motor.
The series PLC can not be brought with the expansion module, but can be installed by the BD board to extend a small amount of I/O.
The series 1N through the installation of BD series PLC board, can achieve RS232, RS485, RS422 communication.
...More relevant models >>>>
Name: PLC
Model: FX1S-10MT-ES/UL
Max input / output points: 10 points.
Supply voltage: 100 - 240VAC.
Input points: 6 points.
Output points: 4 points.
Output type: Transistor (source).
Power consumption (W): 6.
Weight (kg):0.22.
Size (WxHxD) mm:60x90x49.
Host has 10 points (6I/4O), 14 points (8I/6O), 20 points (12I/8O), 30 points (16I/14O) of 4 types.
This type of PLC is mainly used in all of the digital input, digital output control point of the device.
Can be directly connected to the 220V city power, built-in 8K step EEPROM memory, no battery, easy to maintain.
The series transistor output (MT) of the PLC, can be output 2 100KHz pulse, direct drive servo or stepper motor.
The series PLC can not be brought with the expansion module, but can be installed by the BD board to extend a small amount of I/O.
The series 1N through the installation of BD series PLC board, can achieve RS232, RS485, RS422 communication.
Auxiliary parts for FX3GC and FX3UC. "Input and output points: 32 points.
Power supply: DC24V.
Input points: 16 points.
Input specifications: drain / source.
Output points: 16 points.
Output form: transistor output (source).
Power consumption: 8W.
Weight: 0.2KG.
Outline dimension: 34x90x87mm.
Ultra compact model MITSUBISHI FX1S-10MT-ES/UL.
Basic unit: 32.
FX3GC is a connector type of compact PLC,
In the same performance with the FX3GA/FX3G can also save space, the provincial connection FX1S-10MT-ES/UL
Compact third generation standard model.
Connector type provincial space and provincial connection.
Suitable for small scale control of high cost.
Control points to 128 points, the use of CC-Link remote I/O can control the maximum 256 points MITSUBISHI FX1S-10MT-ES/UL.
N product details
Built in CPU, power supply, input and output.
Connector type input and output, the FX3 series of functions to compact body internal condensation. Input and output points: 16 points.
Input points: 8 points.
Input specification: leakage type.
Output points: 8 points.
Output form: transistor output (drain).
Power consumption: 6W.
Weight: 0.2KG.
Outline dimension: 34x90x87mm MITSUBISHI FX1S-10MT-ES/UL.
Hard and compact type third generation micro programmable controller.
Connector type input and output type provincial connection.
Greatly strengthened the industry''s highest level of high-speed processing and positioning and other built-in features MITSUBISHI PLC.
High cost of the province space models.
FX3UC in the province of space, the province also greatly strengthened the connection of high-speed processing and positioning and other built-in features MITSUBISHI PLC.
The host is built in DC24V power supply, the connector input and output form of the transistor output.
In addition, according to the product mix can also achieve network communications, analog control, data collection and other functions MITSUBISHI PLC.
Third generation high function micro programmable controller.
Connector type can save space, province wiring.
Built in high speed processing and positioning.
Ultra small size, control points to 256 points.
Construction of CC-Link remote I/O 384 points. 8 point analog potentiometer function expansion board.Max input / output points: 16 points.
Supply voltage: 100 - 240VAC.
Input points: 8 points.
Output points: 8 points.
Output type: relay.
Power consumption: 30VA.
Weight (kg):0.6.
Size (WxHxD) mm:130x90x87.
Clock function and hour meter function, all of the PLC FX2N has a real-time clock standard.
Continuous scanning function, to define the operation cycle for the application of the continuous scan time.
Input filter adjustment function, you can use the input filter to smooth the input signal (in the basic unit x000 to x017).
Note recording function, Component annotation can be recorded in the program register.
Onlline program editor, online change the program will not lose the working hours or stop production operation FX1S-10MT-ES/UL.
RUN/STOP switch, running on panel / stop switch easy to operate.
Remote maintenance, remote programming software can monitor, upload or uninstall programs and data via modem communications
Password protection, using a eight digit password to protect your program MITSUBISHI FX1S-10MT-ES/UL.
Power supply: DC24V.
Input points: 16 points.
Input specifications: drain / source.
Output points: 16 points.
Output form: transistor output (source).
Power consumption: 8W.
Weight: 0.2KG.
Outline dimension: 34x90x87mm.
Ultra compact model MITSUBISHI FX1S-10MT-ES/UL.
Basic unit: 32.
FX3GC is a connector type of compact PLC,
In the same performance with the FX3GA/FX3G can also save space, the provincial connection FX1S-10MT-ES/UL
Compact third generation standard model.
Connector type provincial space and provincial connection.
Suitable for small scale control of high cost.
Control points to 128 points, the use of CC-Link remote I/O can control the maximum 256 points MITSUBISHI FX1S-10MT-ES/UL.
N product details
Built in CPU, power supply, input and output.
Connector type input and output, the FX3 series of functions to compact body internal condensation. Input and output points: 16 points.
Input points: 8 points.
Input specification: leakage type.
Output points: 8 points.
Output form: transistor output (drain).
Power consumption: 6W.
Weight: 0.2KG.
Outline dimension: 34x90x87mm MITSUBISHI FX1S-10MT-ES/UL.
Hard and compact type third generation micro programmable controller.
Connector type input and output type provincial connection.
Greatly strengthened the industry''s highest level of high-speed processing and positioning and other built-in features MITSUBISHI PLC.
High cost of the province space models.
FX3UC in the province of space, the province also greatly strengthened the connection of high-speed processing and positioning and other built-in features MITSUBISHI PLC.
The host is built in DC24V power supply, the connector input and output form of the transistor output.
In addition, according to the product mix can also achieve network communications, analog control, data collection and other functions MITSUBISHI PLC.
Third generation high function micro programmable controller.
Connector type can save space, province wiring.
Built in high speed processing and positioning.
Ultra small size, control points to 256 points.
Construction of CC-Link remote I/O 384 points. 8 point analog potentiometer function expansion board.Max input / output points: 16 points.
Supply voltage: 100 - 240VAC.
Input points: 8 points.
Output points: 8 points.
Output type: relay.
Power consumption: 30VA.
Weight (kg):0.6.
Size (WxHxD) mm:130x90x87.
Clock function and hour meter function, all of the PLC FX2N has a real-time clock standard.
Continuous scanning function, to define the operation cycle for the application of the continuous scan time.
Input filter adjustment function, you can use the input filter to smooth the input signal (in the basic unit x000 to x017).
Note recording function, Component annotation can be recorded in the program register.
Onlline program editor, online change the program will not lose the working hours or stop production operation FX1S-10MT-ES/UL.
RUN/STOP switch, running on panel / stop switch easy to operate.
Remote maintenance, remote programming software can monitor, upload or uninstall programs and data via modem communications
Password protection, using a eight digit password to protect your program MITSUBISHI FX1S-10MT-ES/UL.
...More relevant models >>>>
Last one: 
next one: Related download