OMRON E3T-FD13R 2M E3T-FD13R 2M

Output: DPDT.
Lighting: Incandescent lamp.
Operating voltage: 12 VAC/VDC.
Pushbutton colorsymbol: R: red, Y: yellow; PY: pure yellow
G: green, A: blue; W: white; PW: pure white.
Item: Alternate operation (Self-holding).
Separate Construction with.
Cylindrical 16-dia. Body.
Miniature design of 28 OMRON E3T-FD13R 2M. 5 mm, the smallest class in the industry.
Detachable Switch.
The same contacts can be used for both standard loads and microloads E3T-FD13R 2M
Easy-to-wire terminal arrangement.
Certified for EN 60947-5-1. Sensing method: Distance settable.
Connection method: Connector (M8, 4 pins).
Model: NPN output.
Distance-settable Sensor Unaffected,
by Workpiece Color and Background OMRON E3T-FD13R 2M.
Distance-settable triangulation model unaffected by color .
Simple positioning settings using a clear LED spot.
(E3Z-LS@3/LS@8).
Detect minute steps. Time specification: Inverse type.
Current setting range: 8 to 26 A.
Operating voltage: 200/220/240 VAC.
Resetting method: Manual.
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase) OMRON E3T-FD13R 2M.
Protects 3-phase induction motors and their loads from damage .
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase.
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easily because operation time,
is indicated from the start of operation.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, and load conditions. Error will occur in the operating,
values of the overload elements. It is recommended to test operation, Size: 45 × 35 mm.
Type: Plug-in.
Control method: ON/OFF operationn .
Control outpput: Relay E3T-FD13R 2M.
Power supply voltage: 100 to 240 VAC.
Ideal for Simple Built-in Control.
A high switching capacity of 10 A at 250 VAC enables,
direct load switching.
A sensor is provided to enable immediate application.
Sockets wiithh finger protection (PTF14A-E) or without,
finger protection (PTF14A) can be used E3T-FD13R 2M.
Simple operation and settings. Even simpler with digital models.
E3T-FD13R 2M Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=E3T-FD13R 2M&select=5