OMRON E2E-X7D1-M1GJ 0.5M E2E-X7D1-M1GJ 0.5M

Input type: DC current input.
Output type: relay contact; 1c HH; PASS, H, L, LL: each 1a.
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
External supply 80mA DC12V.
Power supply voltage: AC/DC24V.
96 (W) * 48 (H * 95mm) some models are not equipped with depth OMRON E2E-X7D1-M1GJ 0.5M.
The most suitable voltage and current signal simulation, measurement and display, identification of the panel table E2E-X7D1-M1GJ 0.5M
Action determine the color, can switch the green / Red 2 kinds of color display.
Equipped with the sub pressure gauge for monitoring the operation trend.
External event input can be applied to a variety of measurement and identification situations OMRON E2E-X7D1-M1GJ 0.5M.
Series of DeviceNet type. Fitting materials: Iron, black coating .
Count: 1 .
Accessories: Description, None;
Material, --;
Count, --.
Applicable sensor (mounting pitch on sensor side): E3Z-G.
Page: Dimensions, 14. Sensing distance: (See note 2.)0 to 3.5 mm(pressed position) (See note 1.).
Sensing method: Pushbutton.
Operation mode: ON with no load OMRON E2E-X7D1-M1GJ 0.5M.
Cable length: 1 m.
Model: PNP output .
Using a pushbutton enables,
accurately detecting difficult-to-detec objects .
Conforms to standards for semiconductor FOUP cassettes to ena,
accurately detecting FOUP cassettes without being affected by the,
material, color, or reflectance of the bottoms of the cassettes.
Thin design enables mounting in a wider range of applications, e.g.,
on transfer arms.
Increased visibility with 4-direction indicator.
Optical detection of actuator operation provides a long life,
(mechanical life: 5 million operations min.).
Models available with PNP or NPN output.
Models are available with very flexible robot cable. Appearance: Square/Projection type LED lighting,
(without Voltage Reduction Unit) A22L-D.
Output: SPST-NO.
Lighting: LED.
Operating voltage: 24 VAC/VDC.
Operation: Momentary operation (self-resetting).
Illumination color: R (red); Y (yellow); G (green); W (white); A (blue).
Install in 22-dia. or 25-dia. Panel Cutout.
(When Using a Ring).
Lever for easily mounting and removing the Switch Unit E2E-X7D1-M1GJ 0.5M.
Increase wiring efficiency with three-row mounting of Switch Blocks.
Finger protection mechanism on Switch Unit provided as a standard feature.
Use 25-dia. ring to install in 25-dia. panel cutouts.
Mounteed using either open-type (fork-type) or closed-type E2E-X7D1-M1GJ 0.5M.
(round-type) crimp terminals.
IP65 oil resistance (non-lighted models).
IP65 (lighted models).
E2E-X7D1-M1GJ 0.5M Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=E2E-X7D1-M1GJ 0.5M&select=5