OMRON E2E-C06S02-MC-B1 E2E-C06S02-MC-B1

Actuator: Panel mount crossroller plunger.
Economical, High Utility Enclosed Switch.
Enclosed Switches with Built-in Basic Switches for High,
Repeatability and Durability of 10 Million Operations Minimum.
Panel mount versions have the same operating position as,
Z Basic Switch.
Suitable for applications demanding higher mechanical,
strength, dustproof and drip-proof properties than those,
on basic switches E2E-C06S02-MC-B1
Resin molded terminal versions are available.
Approved by UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models.). Appearance: Round/Projection type A22-T OMRON E2E-C06S02-MC-B1.
Output: SPST-NO.
Operation: Alternate operation (self-holding).
Illumination color: R (red); Y (yellow); G (green);
W (white); A (blue); B (black) .
Install in 22-dia. or 25-dia. Panel Cutout.
(When Using a Ring).
Lever for easily mounting and removing the Switch Unit.
Increase wiring efficiency with three-row mounting of Switch Blocks.
Finger protection mechanism on Switch Unit provided as a standard feature OMRON E2E-C06S02-MC-B1.
Use 25-dia. ring to install in 25-dia. panel cutouts .
Mounted using either open-type (fork-type) or closed-type.
(round-type) crimp terminals.
IP65 oil resistance (non-lighted models).
IP65 (lighted models). Connection method: Pre-wired.
Cable length: 2 m.
Sensing distance: 300 ± 150 mm.
Model: PNP output.
A CMOS Laser Sensor That’s.
Optimum for Simple Measurements.
A resolution of 0.002 mm that’s suitable for simple measure ments.
Stable measurements for any type of workpiece.
Models available with four different distance specifications.
Long-distance model for up to 1,000 mm. Cable: PVC.
Cable core number (core): 4.
Cable outlet direction: L type.
Cable length L:2m.
The province, province hours maintenance, use waterproof connector environment and strong tolerance of FA.
Conform to IP67. FA small special connector flame retardant 94V-0.
The connector wiring system, convenient equipment maintenance, reduce equipment downtime.
IEC61076-2-101 (IEC60947-5-2).
For LED products, can clearly confirm the status of the sensor action. Type: rectangle.
Screen mode: level 2.
Output: DPDT.
Power supply voltage: DC24V.
Contact type: standard load (AC250V, 3A; DC30V, 3A).
Operation: alternating action (self retaining).
Color: yellow.
Color: yellow.
In the touch and the ability to protect than OMRON''s previous models have improvedd .
The micro volumee design of 23mm is realized E2E-C06S02-MC-B1.
Micro design and unique combination of soft sensing.
LED has five colors (red, yellow, green, white, and blue).
Built in basic switch improves touch.
Built in basic switches in the previous modell bbased on the OMRON to improve the protection E2E-C06S02-MC-B1.
Chip LED to produce a uniform surface brightness.
From the front panel installation, more convenient.
E2E-C06S02-MC-B1 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=E2E-C06S02-MC-B1&select=5