G6A-234P DC24 OMRON G6A-234P DC24

Specifications: I/O;
NPN (input: + common, output: - common);
16 inputs/16 outputs.
I/O connections: MIL connector.
Rated internal circuit power supply voltage:
Supplied from the communications connector.
Rated I/O power supply voltage: 24 VDC.
Very Compact 16-/32-point Remote Terminals.
Used in combination with Interface,
Conversion Boards (e OMRON G6A-234P DC24. g., D-Sub) to,
connect to a wide range of interfaces G6A-234P DC24
35 x 60 x 80 mm (W x D x H). Name: Laser Reflectors, Standard.
Ambient operating temperature range: -10 to 55°C (No icing).
Ambient storage temperature range: -25 to 70°C (No icing).
Ambient operating humidity range: 35 to 85% (No condensation) OMRON G6A-234P DC24.
Ambient storage humidity range: 35 to 85% (No condensation) . Foreign matter on the surface of a vibrating object,
Offset core operation of the joint segment is poor, etc.,
Can refer to the waveform set, extraction.
Joint detection of wrapping paper.
Fiber burr belt.
Drum segment detection.
Seam detection. Cable length L: A, 3.0 m; B, 2.75 m.
Connect Connector-Terminal,
Block Conversion Units (XW2@) to,
I/O Units for Programmable,
Controllers with one touch OMRON G6A-234P DC24. Appearance: Shielded, M18.
Sensing distance: 4 mm.
Output configuration/Operation mode: DC 3-wire, NPN NO.
A Proximity Sensor for Aluminum,
Brass and Other Non-ferrous Metals.
Iron Is Not Detected.
Non-ferrous metals, such as aluminum and brass, are detected.
Ferrous metals, such as iron and nickel, are not detected.
Aluminum foil, however, cannot be detected. Small, easy to use.
Detection mode: on the radio.
Shape: horizontal type.
Connection mode: lead wire.
Detection distance: 2 meters of red light.
Output mode: NPN output. Release key type: Special release key.
Indicator: Green.
Lock and release types: Solenoid lock Mechanical release.
Contact configuration(door open/closed detection switch,
and lock monitor switch contacts): 2NC/1NO+3NC.
Conduit opening: M20.
Holding Force of 3,000 N.
Two ssafety circuits annd two monitor contacts provide an,
array of monitoring patterns G6A-234P DC24.
Standard gold-clad contacts enable use with ordinary loads,
and microloads.
Models with trapped keys prevent workers from being locked,
in hazardous work areas. .
Models with rear release buttons allow people to unlock the,
Switch and escape if they are locked into hazardous areas G6A-234P DC24.
IP67 degree of protection.
G6A-234P DC24 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=G6A-234P DC24&select=5