E52-CA1DY M6 4M OMRON E52-CA1DY M6 4M

I/O classification: Output.
Internal I/O circuit common: PNP (+ common).
I/O points: 8.
Rated voltage: 24 VDC.
I/O rated voltage: 24 VDC.
Long-distance Communications Supported by SRT2 Models,
(Long-distance/High-speed Communications Selection).
Ultra-compact at 80 x 48 x 50 (W x H x D) mm for,
4-point and 8-point terminals and 105 x 48 x 50,
(W x H x D) mm for 16-point terminals OMRON E52-CA1DY M6 4M.
Two independent power supplies can be used,
because the I/O terminals are insulated from the internal circuits E52-CA1DY M6 4M
DIN track mounting and screw mounting are both supported.
E32-T16PR type: special beam type; region detection,
Specialty: regional width 11mm,
Shape / detection distance (mm): 1100; 840; 560 (220),
Bending radius (mm): R; R1 OMRON E52-CA1DY M6 4M.
Standard test object (minimum test object) (mm) 1: (0.2) 3,
Fiber element for meeting diversified needsActuator: Coil spring (spring diameter: 6.5).
Indicator: LED.
Item: Basic.
Pretravel (PT): 20±10 mm.
Select the Best Two-circuit Switch for the,
Operating Environment and Application,
from a Wide Range of Models,
A wide selection of models is available, including General-purpose,
Environment-resistant, and Spatter prevention Switches OMRON E52-CA1DY M6 4M.
Standard-feature gold-clad crossbar contacts provide high reliability.
Applicable to either standard loads or microloads.
Switches with Lever Actuators provide 90° overtravel,
one-side operation, and four-direction head mounting.
Approved standards: EN/IEC, UL, cUL, and CCC.
Contact your OMRON representative for information on approved models. Release Key Type: Standard (metal).
Wiring method: Connector.
Solenoid voltage/Indicator: 24VDC (without indicator).
Lock and release type: Mechanical lock Solenoid release.
Contact configuration (door open/closed detection switch,
and lock monitor switch contacts): 4-contact Model,
Insert the built-in switch (A, B, C, D, S, T, U or V) into the blank @.
Conduit size (See Note.): M20.
World''s smallest Class 6-contact Guard Lock.
Safety-door Switch.
.
Wiring time is reduced with two types of wiring.
methods capable of one-touch attachment and removal.
A wide variety of built-in switches can be used for various devices.
(4-, 5-, and 6-contact models are available).
Key holding force of 1,300 N.
It is possible to chhange the key inserttion point E52-CA1DY M6 4M.
without detaching the head.
Drive solenoids directly from the Controller.
.
Lockout Key to prevent workers from becoming.
trapped inside the hazardous area.
The vertical D4SL Guard Lockk SSafety-door Switch,
can be easily mounted on 40 × 40 mm aluminum frames E52-CA1DY M6 4M.
The plastic material makes the Slide Key suitable,
for lightweight doors.
E52-CA1DY M6 4M Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=E52-CA1DY M6 4M&select=5