LK Automation Limited
Home >> Price >> MITSUBISHI >> MITSUBISHI HC-PQ033D HC-PQ033D
Brand sort

MITSUBISHI HC-PQ033D HC-PQ033D

Country: JAPAN
Name: servo motor
Model: HC-PQ033D
Market price: U.S.$ 0
(The following are the market open price not sales price!)
MITSUBISHI HC-PQ033D
MITSUBISHI inverter FR-F720 series.
Voltage level: three phase 200V.
Frequency converter capacity: 18.5KW.
When the inverter is running, the starting current and starting torque of the motor are how?
With the operation of the inverter, with the acceleration of the motor to improve the frequency and voltage,
The starting current is limited to 150% below the rated current (according to the different types of aircraft, 125%~200%) HC-PQ033D
Starting with power frequency power supply, the starting current is 6~7 times of the rated current, therefore, the impact on the mechanical and electrical.
The inverter drive can be smoothly start (start time longer) MITSUBISHI HC-PQ033D.
The starting current is 1.2~1.5 times of the rated current, and the starting torque is 70%~120% rated torque;
For the inverter with the torque automatic enhancement function, the starting torque is more than 100%, which can start with full load . Output extension board (transistor output 2 point)
(FX1S and FX1N host general). Cable length: 3.0m.
For the connection between QnAS/AnSCPU/ motion controller GOT (A Series) and CPU MITSUBISHI HC-PQ033D.
Applicable models: GT16, GT15, GT11 . Cable length: 0.45 meters
Extending cable to connect CPU main substrate and extended substrate,
According to the model can provide different cable length,
If you need to connect the AnN type expansion substrate is required,
Selection of A1SC05NB (A1SC07NB) cable. Power: 3.7kw.
Purpose: to suppress the power harmonics.
Improve the power factor, reduce the input side of the high harmonic current.
Make sure that this option is installed in the FR-A820-03800 (75K) and FR-A840-02160 (75K) and above capacity and above capacity.
At the same time the installation options in the use of 75kW and above motor. (the IP55 series has a built-in DC reactor.)
According to the motor power used to select the DC reactor.
(when the inverter capacity is greater than the motor capacity, is still based on the motor capacity to choose.) Series: multimedia and advanced features and features of a variety of high-performance models.
Screen size: 15 inches.
Display color: 256 color or more color.
Installation type: compatible with multimedia and video /RGB.
Resolution: SVGA (800 x 600).
Display device: TFT color (high brightness, wide viewing angle).
Host frame color: black.
Power type: DC24V.
Communication interface: with built-in RS-422.
High performance models with multimedia and advanced features and functionality (including embedded communications capabilities).
User storage capacity: 15MB (GT16__-VNB__:11MB).
With HOST USB and device USB port.
Standard Ethernet, RS-422/485 and RS-232 ports.
Support multimedia and video /RGB units.
Analog touch panel.
Do not let the touch screen surface with water drops or other soft things stick to the surface,
Otherwise, the touch screen is easy to mistake that there is a hand touch caused by surface acoustic wave screen is not allowed.
In addition to cleaning the dirt on the surface of the touch screen,
You can use a soft dry cloth or a cleaning agent to clean out the center of the screen carefully,
Or use a dry soft cloth dipped in industrial alcohol or glass cleaning fluid to clean the touch screen surface.
Touch screen response is slow if you use a hand or other touch to touch the surface acoustic wave touch screen,
This shows that it is likely that the touch screen system has been obsolete, the internal clock frequency is too low,
Or because there is water in the surface of the touch screen to make the touch screen mobile, rapid response recovery,
To replace or upgrade the system must, or use dry cloth touch screen on the surface of the water HC-PQ033D.
If the user is operating the touch screen, the direction of the touch move is to the left,
But the cursor of the system moves to the right,
The failure may be due to the conneecttion of the control box and the touch screen connected to the connector or the touch screen,
Users as long as the direction of the re exchange of it HC-PQ033D.
HC-PQ033D Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=HC-PQ033D&select=5


...more relevant model market price >>>>
Related products
MITSUBISHI
servo motor
HC-PQ13D
MITSUBISHI servo motor HC-PQ13D
Type: HC-PQ type. Output power: 0.1kw. R
MITSUBISHI
servo motor
HC-PQ033B
MITSUBISHI servo motor HC-PQ033B
Type: HC-PQ type. Output power: 0.03kw.
MITSUBISHI
servo motor
HC-PQ13B
MITSUBISHI servo motor HC-PQ13B
Type: HC-PQ type. Output power: 0.1kw. R
MITSUBISHI
servo motor
HC-PQ23BL
MITSUBISHI servo motor HC-PQ23BL
Type: HC-PQ type. Output power: 0.2kw. R