HC-MFS73G1(1/5) MITSUBISHI HC-MFS73G1(1/5)

Cable length: 10 meters.
PC to GOT long distance connection cable.
For connection between GOT and GOT. 32 point connector for compression connector (37 pin D-sub connector).Cable length: 1m.
RS-485 terminal unit conversion unit.
Applicable model: GT16. Protective film for 5.7 inch screen (for HandyGOT) MITSUBISHI HC-MFS73G1(1/5).
Scrub (frame: white), 5.
Applicable model: used for hand held GOT GT11. Station type: Master station HC-MFS73G1(1/5)
Maximum number of stations: maximum 16.
Occupied points: 8 points.
Transfer speed: 10Mbps.
Power supply: 240mA DC24V.
Weight: 0.3kg.
FX3U-16CCL-M is the master module of V2 CC-LINK.
The main station can be connected to 8 remote I/O stations, and 8 remote equipment station or intelligent equipment station MITSUBISHI HC-MFS73G1(1/5).
Can be connected to FX3GA, FX3GE, FX3GC, FX3U and FX3UC of the host.
Connecting FX3UC, FX3GC requires FX2NC-CNV-IF or FX3UC-IPS-5V. Cable length: 35 meters.
For QCPU and GOT (need A9GT-QCNB) connection.
For the connection between GOT and GOT. Output points: 4 points.
Output voltage and current: DC24V/AC240V, 2A/1 point, 8A/1 common end MITSUBISHI HC-MFS73G1(1/5).
Output response time: 12ms.
4 point /1 a public side .
Output form: relay output.
16 point terminal station.
MITSUBISHI PLC protection and chain procedures.
Protection and chain is an indispensable part of the program, must be carefully considered.
It can avoid the control logic confusion caused by illegal operations.
MITSUBISHI PLC initialization procedure. After MITSUBISHI PLC on power, the general need to do some of the initial operation,
In order to start making necessary preparations, to avoid the wrong operation of the system.
The main contents of the initialization program are: to some data area, counter and so on,
Data needed to restore some of the data area,
Set or reset some relays,
For some initial state display, etc..
MITSUBISHI PLC program simulation debugging
The basic idea of program simulation debugging is,
In order to facilitate the form of simulation to generate the actual state of the scene,
Create the necessary environmental conditions for the operation of the program.
Depending on the way the field signals are generated,
The simulation debugging has two forms of hardware simulation and software simulation. Motor series: low inertia, low power.
Rated output power: 0.05kw.
Rated speed: 3000r/min.
Whether to bring the brakes: with.
Axis end: D type shaft.
Protection level: IP55 does not include the shaft part and the connector.
Features: low inertia is particularly suitable for high speed motor (6000 or 12000 RPM / min) of general industrial machinery.
Application example 1: drive belt drive, robot.
Application example 2: assembly machine, sewing macchine, X-Y working table HC-MFS73G1(1/5).
Application example 3: food manufacturing machinery, semiconductor manufacturing equipment, knitting machine and embroidery machine.
High resolution encoder 131072p/rev (17 bit).
The encoder with high reesoolution ensures excellent performance and stability at low speed HC-MFS73G1(1/5).
All motor dimensions are the same as before and all are compatible with the wiring.

HC-MFS73G1(1/5) Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=HC-MFS73G1(1/5)&select=5