LK Automation Limited
Home >> Price >> MITSUBISHI >> Sale MR-J4-15KA-RJ MITSUBISHI MR-J4-15KA-RJ
Brand sort

Sale MR-J4-15KA-RJ MITSUBISHI MR-J4-15KA-RJ

Country: JAPAN
Name: Servo driver
Price: 0
MITSUBISHI MR-J4-15KA-RJ
Cable length: 0.6m.
For the connection between QCPU and GOT.
For connection between two GOT.
Applicable models: GT16, GT15, GT11, GT27, GT25. MITSUBISHI general purpose AC servo amplifier MR-J2 series.
Rated output: 0.2kw.
Interface: general purpose interface.
Voltage: single phase AC200V.
MITSUBISHI servo system in the MITSUBISHI servo amplifier is widely used,
It can not only be used in the high precision position control and speed control of the working machinery and general industrial machinery,
Can also be used in the field of speed control and tension control MR-J4-15KA-RJ
By installing a personal computer with a servo setting software, the parameters setting, trial run, state display, and gain adjustment are performed MR-J4-15KA-RJ.
MITSUBISHI servo system MR-J2S column is developed on the basis of the servo MR-J2 series with a higher performance and more features of the MITSUBISHI servo system,
The control modes are position control, speed control and torque control, as well as the switching control mode among them MR-J4-15KA-RJ. Servo motor series: ultra low inertia, medium capacity.
Rated output: 3.5kw.
Rated speed: 3000r/min .
Electromagnetic brake: incidental.
Power supply: 200V.
The most suitable medium capacity, ultra low inertia type product''s high frequency operation and so on.
Improve the environmental performance of HG-KR, HG-MR, HG-RR, HG-UR series of products using IP65.
100 scene, there are 100 different drive control.
In order to meet the needs of the diverse and detailed field,
MR-J4 product line configuration, providing a wealth of servo amplifier and servo motor products.
Can meet the different needs of different customers. Output points: 8 points.
Output voltage and current: AC100 ~ 240V, 0.6A/1 point, 4A/1 public end.
Response time: 0.5Hz+1ms.
Output form: bidirectional thyristor output.
8 point /1 a public side.
26 point terminal station.
Number of stations: 1 stops.
Type remote I/O units outside of the panel (optical data connection).
Equipment layer / field bus CC-Link device layer is the PLC and other control devices and sensors and drive devices connected to the field network,
Network for the lowest layer of the whole network system.
Using CC-Link field bus connection, the number of wiring is greatly reduced,
Improve the maintainability of the system.
And, not just the amount of data ON/OFF and other switches,
Can also be connected to the ID system, bar code reader, inverter, man-machine interface and other intelligent devices,
From the completion of a variety of data communication, the management of the terminal production information can be realized,
On the centralized management of the state of the machine movement,
Make maintenance work efficiency also greatly improved.
Q series PLC in the use of CC-Link function better,
And easier to use.
Mitsubishi Co PLC network inherited the traditional use of the MELSEC network,
And make it better in terms of performance, function, easy to use etc..
Provides a layer of three layers of clear network, to provide the most suitable network products for a variety of uses.
The information layer /Ethernet (Ethernet) information layer is the highest level of the network system,
Mainly in the PLC, the device controller and production management with PC transmission between production management information, quality management information and the operation of equipment, etc.,
Information layer using the most common Ethernet.
It is not only able to connect the PC system UNIX, windows system, etc.,
And can connect a variety of FA deevices .
The Ethernet module has the function of Internet e-mail receiving and sending,
The user can send and receive the production information conveniently in any place of the world,
Build a remote monitoring management system MITSUBISHI MR-J4-15KA-RJ.
At the same time, tthee use of the Internet FTP server functions and MELSEC protocol can be very easy to achieve the program upload / download and transfer of information MITSUBISHI MR-J4-15KA-RJ.
MR-J4-15KA-RJ Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=MR-J4-15KA-RJ&select=5


...more relevant model market price >>>>
Related products
MITSUBISHI
Servo driver
MR-J4-15KA4-RJ
MITSUBISHI Servo driver MR-J4-15KA4-RJ
1 axis servo amplifier. MITSUBISHI gener
MITSUBISHI
Servo driver
MR-J4-60A4
MITSUBISHI Servo driver MR-J4-60A4
1 axis servo amplifier. MITSUBISHI gener
MITSUBISHI
Servo driver
MR-J4-DU37KB4-RJ
MITSUBISHI Servo driver MR-J4-DU37KB4-RJ
Drive unit. MITSUBISHI universal AC serv
MITSUBISHI
Servo driver
MR-J4-DU45KB4
MITSUBISHI Servo driver MR-J4-DU45KB4
Drive unit. MITSUBISHI universal AC serv