MITSUBISHI MR-H15KACN MR-H15KACN

I/O slots: 5 slots.
Could you install the power module.
Outline dimension: 315*130.
There are two types of extended floor,
A power module can be inserted, and the other one is not.
The choice of any type of substrate depends on the total DC5V current consumption and the power supply on the CPU main substrate MITSUBISHI MR-H15KACN.
If the total demand is less than the power output, no additional power supply,
Then you can choose a more economical expansion board MR-H15KACN
Both ends of the main base plate of the CPU have an expansion interface, and can be used for extending the cable connection. MITSUBISHI inverter FR-F740 series.
Voltage level: three phase 400V MITSUBISHI MR-H15KACN.
Frequency converter capacity: 500KW.
The main circuit of the inverter can be divided into two categories in general: voltage type is the voltage source of the DC converter for AC inverter,
The filtering of the DC circuit is the capacitance; the current mode is the DC conversion of the current source to the AC inverter,
The DC loop filter is the inductor .
Why is the frequency of the inverter voltage proportional to the change?
The electromagnetic torque of any motor is the result of the interaction between the current and the magnetic flux, the current is not allowed to exceed the rated value, otherwise it will cause the heating of the motor MITSUBISHI MR-H15KACN.
Therefore, if the magnetic flux decreases, the electromagnetic torque will decrease, which leads to the reduction of the load carrying capacity. Cable length: 30m.
For MR-J2S-700A (4) /CP/CL or less.
Encoder for HC-SFS; HC-LFS; HC-RFS; 2000r/min HA-LFS; HC-UFS servo motor.
-H products have a long flex life.
Drive: MR-H_ACN series SSC-NET compatible AC servo.
Rated output: 0.2KW.
The servo controller can easily transfer the operation module and the field bus module through the automation interface,
At the same time using different fieldbus modules to achieve different control modes (RS485, RS232, optical fiber, InterBus, ProfiBus),,
And the contrrol mode of general inverter is single MR-H15KACN.
The servo controller is directly connected with a rotary transformer or an encoder, which forms a closed loop of speed and displacement control.
The general inverter can only form an open loop cconntrol system MR-H15KACN.
Servo controller of the control parameters (such as steady-state accuracy and dynamic performance) is better than the general inverter.
MR-H15KACN Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=MR-H15KACN&select=5