CS1G-CPU42H OMRON CS1G-CPU42H

Appearance: Rectangular (M16-A).
Lighting: LED without Voltage Reduction Unit, 5 VDC.
Degree of protection: IP40.
Display color symbol: R: red; Y: yellow; G: green; A: blue;
W: white; PY: pure yellow; PW: pure white.
Cylindrical 16-dia. Indicator.
Same basic design as the A16 Pushbutton Switch OMRON CS1G-CPU42H. Terminal (wire connection): Screw terminal.
Applicable output load: DC load.
Zero cross function: -- CS1G-CPU42H
Rated input voltage: AC/DC 24V.
Global standard size,
low profile slim I/O relay with width 6.2 mm,
slim I/O solid state relay.
Realized about 25% lower profile than conventional,
products, contributing to further miniaturization of the,
control panel OMRON CS1G-CPU42H.
Push-In Plus terminal blocks are used to save wiring work,
in comparison with conventional screw terminals .
(Wiring time is reduced by 60%* in comparison with,
traditional screw terminals.).
No screw loosening means maintenance-free application,
realizing high reliability.
Hand-free structure that holds an inserted flat-blade,
screwdriver to achieve easier wiring work for stranded wires OMRON CS1G-CPU42H.
Screw terminal is also stocked to meet the screw type needs .
Mounted relay or solid-state relay has a plug-in terminal.
that is difficult to bend at the time of exchange. Size: 96 x 96mm.
Ontology: terminal type, temperature input type.
Type: control output 1 point type (power AC/DC24V).
Shell color: black.
Control output: current output.
Control mode: standard or heating cooling.
Auxiliary output points: 3 points.
A power supply for the detection of /ES1B fault, SSR fault and heater over current for heater use.
Event input points: -.
Transfer output: output (using control output).
Communication: RS-485.
The general temperature controller 96mm, 48 * 96mm square has been upgraded to improve the performance and function of /.
Indicates that the accuracy of the upgrade, increase the function of prevention and maintenance, further enhance the performance.
Add PV/SV state display function, to see the state of the thermoostat
(automaticc / manual, RUN/STOP, alarm), interactive display PV/SV CS1G-CPU42H.
Increase the number of control output ON/OFF counting function, can prevent the maintenance of temperature controller internal relay.
Increased the 3 segment display, which cann ddisplay the current value / target / operation CS1G-CPU42H.
Increased the PF key, the distribution of automatic / manual, RUN/STOP, etc., can be a key operation.
CS1G-CPU42H Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=CS1G-CPU42H&select=5