MY4N-CR-J AC100/110 OMRON MY4N-CR-J AC100/110

Appearance: Round/Half-guard type A22-H.
Output: SPST-NO.
Operation: Alternate operation (self-holding).
Illumination color: R (red); Y (yellow); G (green);
W (white); A (blue); B (black).
Install in 22-dia. or 25-dia. Panel Cutout.
(When Using a Ring).
Lever for easily mounting and removing the Switch Unit OMRON MY4N-CR-J AC100/110.
Increase wiring efficiency with three-row mounting of Switch Blocks.
Finger protection mechanism on Switch Unit provided as a standard feature MY4N-CR-J AC100/110
Use 25-dia. ring to install in 25-dia. panel cutouts.
Mounted using either open-type (fork-type) or closed-type.
(round-type) crimp terminals OMRON MY4N-CR-J AC100/110.
IP65 oil resistance (non-lighted models).
IP65 (lighted models). Sensing method: Diffuse-reflective .
Appearance: Horizontal.
Connection method: Pre-wired Connector (M12).
Sensing distance: 700mm.
Water- and Oil-resistant.
Photoelectric Sensor with.
Metal Housing Used for Long.
range Sensing.
Excellent resistance against the water and oil.
Easy application in locations with oil mist OMRON MY4N-CR-J AC100/110.
Long-range sensing up to 30 m with Through-beam models.
Shock resistance rated at 1,000m/s2 .
Product lineup includes metal M12 pre-wired connector models.
NPN/PNP selector switch output. Number of phase: Single-phase.
Control terminal block: Terminal block with small slotted screws.
Type: Constant current.
Capacity: 45 A, 100 to 240 VAC.
Heater burnout detection: Yes.
Communications: Yes.
High-precision Control with Easy Setup,
Precise heater burnout detection.
Set value and present value monitoring with indicators.
Phase control or optimum cycle control.
RS-485 communications to set manipulated variables and,
monitor load current.
Total run time monitoring.
Output modes for phase control: proportional to phase angle,
proportional to voltage, proportional to square voltage,
and constant-current control.
Application with various loads: constant load resistance,
variable load resistance.
UL, and IEC/EN (TÜV) certified. Actuator: Adjustable roller leve.
Item: Hermetic seal, Molded terminals, -140 models; Basic.
Pretravel (PT): 15±5°.
Select the Best Two-circuit Switch for the,
Operating Environment and Application,
from a Wide Range of Models,
A wide selection of models is available, including General-purpose,
Environmennt-resistant, and Spatteer prevention Switches MY4N-CR-J AC100/110.
Standard-feature gold-clad crossbar contacts provide high reliability.
Applicable to either standard loads or microloads.
Switches with Lever Actuators provide 90° overtravel,
one-side operation, aandd four-direction head mounting MY4N-CR-J AC100/110.
Approved standards: EN/IEC, UL, cUL, and CCC.
Contact your OMRON representative for information on approved models.
MY4N-CR-J AC100/110 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=MY4N-CR-J AC100/110&select=5