H3CR-HRL AC200-240 M OMRON H3CR-HRL AC200-240 M

I/O classification: Output.
I/O points: 16.
Internal I/O circuit common: PNP (– common).
Rated voltage: 12 VDC, 24 VDC.
Single Cable Connection to PLC Means.
Space is Saved and Less Control Panel.
Wiring is Required.
Compact size: 182 (W) 85 (D) 68 (H) mm,
(8-point Output Block width is 102 mm) OMRON H3CR-HRL AC200-240 M.
Connects to the PC through the connecting cable,
(G79 Series) and connector, and requires only a,
snap-in operation H3CR-HRL AC200-240 M
Surge suppressor circuit built-in.
Immediate recognition of I/O signal status using,
LED operation indicators.
G3TA I/O Solid-state relay can be mounted instead,
of G7T.
Mounts easily on a DIN track OMRON H3CR-HRL AC200-240 M.
Approved by UL, CSA (except for G7TC-OC16-1). Field of view: C-mount .
Number of pixels: 1.3 million pixels.
Monochrome: PNP.
Field of view/Installation distance: Refer to optical chart on p.30..
Inspection capabilities, camera options,
and communication options -- this powerful,
heavy weight has it all.
This Vision Sensor provides all of the best-selling,
features found in high-end models without the,
need as in vision system for a separate controller OMRON H3CR-HRL AC200-240 M.
This new Smart Camera was designed to attract,
potential customers to try the FQ2 Series. Appearance: Round/Full-guard type LED lighting,
(without Voltage Reduction Unit) A22L-G.
Output: SPST-NO.
Lighting: LED.
Operating voltage: 12 VAC/VDC.
Operation: Momentary operation (self-resetting).
Illumination color: R (red); Y (yellow); G (green); W (white); A (blue).
Install in 22-dia. or 25-dia. Panel Cutout.
(When Using a Ring).
Lever for easily mounting and removing the Switch Unit.
Increase wiring efficiency with three-row mounting of Switch Blocks.
Finger protection mechanism on Switch Unit provided as a standard feature.
Use 25-dia. ring to install in 25-dia. panel cutouts.
Mounted using either open-type (fork-type) or closed-type.
(round-type) crimp terminals.
IP65 oil resistance (non-lighted models).
IP65 (lighted models). Actuator: Plunger.
Conduit openings: G1/2 (PF1/2).
2NC (Slow-action).
Robust safety limit switch with metal housing.
Slow-action and snap-action contact with,
certified direct opening operation certification.
Direct opening mechanism (NC contacts only) added to,
enable opening contacts when faults occur, such as fused contacts.
Safety of lever settings ensured using a mechanism that,
engages a gear between the operating position indicator pplate and the lever .
Eqquipped with a mechanism that indicates the applicable,
operating zone, as well as push-button switching to control left and right motion H3CR-HRL AC200-240 M.
Head seal structure strengthened to improve seal properties.
(TÜV: IEC IP67, UL: NNEMMA 3, 4, 4X, 6P, and 13) H3CR-HRL AC200-240 M.
Wide standard operating temperature range: –40 to 80°C (standard type).
Certified standards: UL, CSA, EN (TÜV), and CCC.

H3CR-HRL AC200-240 M Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=H3CR-HRL AC200-240 M&select=5