WS02-CPLC1-L10 OMRON WS02-CPLC1-L10

Terminal (Wire connection): Screw terminal.
Classification: Standard.
Latching lever (Test switch): No.
Rated input voltage: AC, 110V.
Global standard size, low profile slim.
I/O relay with width 6.2 mm.
Realized about 25% lower profile than conventional.
products, contributing to further miniaturization of the control panel OMRON WS02-CPLC1-L10.
Realized opening and closing ability with one pole 6 A slim shape WS02-CPLC1-L10
Micro load products for one pole 50 mA using Au-plated.
contacts for small load switching also available.
Since G2RV is a transparent case, confirming the state of,
the contact with the naked eye is possible, and easy to,
confirm abnormality on-site (installed location) OMRON WS02-CPLC1-L10.
Screw terminal is also stocked to meet the screw type needs .
Mounted relay uses plug-in terminals that are difficult to,
bend when exchanging. Sensing method: Convergent reflective.
Connection method: Pre-wired (2 m).
Sensing distance : 20 to 35 mm .
function Timer: With .
Model: PNP output.
Reliable Detection Unaffected by PCB OMRON WS02-CPLC1-L10.
Holes or Notches.
High-limit E3S-LS3@ is suitable for incorporation in devices .
Wide-range E3S-LS3@W is ideal for detecting tall components,
mounted on boards.
Timer function models available. CPU Unit: CP1L-M CPU Units with 60 Points.
Specifications: CPU type, Memory capacity: 10K steps
High-speed counters: 100 kHz, 4 axes Pulse outputs:
100 kHz, 2 axes (Models with transistor outputs only);
Power supply, DC power supply; Output method, Relay output;
Inputs, 36; Output, 24.
Standards: UC1, N, L, CE.
High Performing Programmable Controller with Embedded Ethernet.
"CP1L-EM" and "CP1L-EL" has a standard-feature Ethernet port.
"CP1L-M" and "CP1L-L" has a standard-feature peripheral USB port.
Function blocks (FB) allow you to build up modular structure and,
programming of laddeer diagrams . Conneection method: Pre-wired WS02-CPLC1-L10.
Cable length: 2 m.
Sensing distance: 600 ± 400 mm.
Model: NPN output.
A CMOS Laser Sensor That’s.
Optimum for Simple Measurements.
A resolution of 0.002 mm that’s suitable for simple measure ments.

Sttable measurements for any type of workpiece WS02-CPLC1-L10.
Models available with four different distance specifications.
Long-distance model for up to 1,000 mm.
WS02-CPLC1-L10 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=WS02-CPLC1-L10&select=5