SGE-225-2-0750N 04000C OMRON SGE-225-2-0750N 04000C

Case color: Black.
Control output: Voltage output (for driving SSR).
Control mode *1: Standard or heating/cooling.
No. of auxiliary outputs: 1.
Detection of heater burnout, SSR failure, and heater overcurrent: --.
No. of event inputs: 2.
Transfer output *2: --.
Communi cations: --.
Previous model: Thermocouple input, --;
Resistance thermometer input, -- OMRON SGE-225-2-0750N 04000C.
New 48 x 24-mm Basic Temperature,
Controller with Enhanced Functions and,
Performance SGE-225-2-0750N 04000C Improved Indication Accuracy,
and Preventive Maintenance Function.
Indication Accuracy.
Thermocouple input: ±0.3% of PV (previous models: ±0 OMRON SGE-225-2-0750N 04000C. 5%),
Pt input: ±0.2% of PV (previous models: ±0.5%),
Analog input: ±0.2% FS (previous models: ±0 . 5%),
Models are available with screw terminal blocks or screwless,
clamp terminal blocks.
A PV/SV-status display function can be set to automatically alternate,
between displaying the status of the Temperature Controller (auto/
manual, RUN/STOP, and alarms) and the PV or SV.
Preventive maintenance for relays in the Temperature,
Controller using a Control Output ON/OFF Counter OMRON SGE-225-2-0750N 04000C.
Switch the PV display between three colors .
Compatible with Support Software (CX-Thermo version 4.2 or higher).
Eleven-segment displays.
Models are available with one or two alarm outputs. Type: rectangle.
Screen mode: level 2.
Using voltage: DC5V.
Operating above color: blue.
Color: red.
Micro design, the length of the body is only 23mm.
LED has five colors (red, yellow, green, white, and blue).
Chip LED to produce a uniform surface brightness.
From the front panel installation, more convenient. The communication unit can be connected to the CompoNet network with a multi function small transducer MX2.
Power supply: through the inverter power supply.
Protection structure: IP20.
From station type: word from station unit (mixed type).
Authentication: Conformance testing via CompoNet. Ratings: 1 A at 30 VDC.
LED indicator: With indicator.
Actuator: Plastic rod.
Many Models Including Roller Lever.
Switches are Only 16-mm Thick with Connector.
New ceenter roller lever models tthat enable ganged mounting SGE-225-2-0750N 04000C.
of up to 6 Switches.
Cable connectors for easy Switch replacement.
Triple-seal construction to provide IEC IP67 degree of protection.
Operation indicators available for easy monitoring,
((sttandard indicator is lit when Switch is not operating) SGE-225-2-0750N 04000C.
Approved by UL and CSA.
(Ask your OMRON representative for Information on approved models.)
SGE-225-2-0750N 04000C Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=SGE-225-2-0750N 04000C&select=5