OMRON Z510-SW17 Z510-SW17

Number of beams: 90.
Protective height: 1825mm.
Model: PNP output.
Basic Type with a combination of.
performance and functionality.
Up to three sets of series-connected sensors.
The muting function is enabled simply with Muting Key Cap.
Comes standard with interlock and auxiliary output functions OMRON Z510-SW17. Item: Mark-detecting models (multiple color light sources); Green LED.
Functions: Timer, Response speed change Z510-SW17
Model: NPN output.
Advanced Fiber Amplifier Units.
Features a Power Tuning function that optimizes light,
reception at the press of a button.
APC circuits to suppress LED aging degradation used with,
4-element LEDs OMRON Z510-SW17.
2-channel models achieve the thinnest* profile in the industry,
at only 5 mm per channel .
2-channel models also offer AND/OR control output.
The E3X-MDA0 with two channels supports an EtherCAT Sensor.
Communications Unit or CompoNet Sensor Communications Unit. No. of cable cores: 4.
Item: Vibration-proof robot cable.
Cable connection direction: Straight.
Cable length L: 1 m OMRON Z510-SW17.
Small Round Water-resistive.
Connectors.
Water-resistive, compact connector meets IP67 requirements .
Conventional M8 screw-mounting models are available along with,
S8 snap-in models that connect and disconnect with one touch.
Ideal for a wide variety of FA and OA applications.
Connectors on both cable ends require no harness work.
Some new M8 models with 3 or 5 poles. Release Key Type: Special (resin).
Wiring method: Connector.
Solenoid voltage/Indicator: 24VDC (Orange).
Lock and release type: Mechanical lock Solenoid release.
Contact configuration (door open/closed detection switch,
and lock monitor switch contacts): 6-contact Model,
Insert the built-in switch (N, P, Q or R) into the blank @.
Conduit size (See Note.): 1/2-14NPT.
World''s smallest Class 6-contact Guard Lock.
Safety-door Switch.
.
Wiring time is reduced with two types of wiring.
methods capable of one-touch attachment and removal.
A wide variety of built-in switches can be used for various devices.
(4-, 5-, and 6-contact models are available).
Key holding force of 1,300 N.
It is possible to chhange the key insertion point Z510-SW17.
without detaching the head.
Drive solenoids directly from the Controller.
.
Lockout Key to prevent workers from becoming.
trapped inside the hazardous area.
The vertical D4SL Guard Lockk SSafety-door Switch,
can be easily mounted on 40 × 40 mm aluminum frames Z510-SW17.
The plastic material makes the Slide Key suitable,
for lightweight doors.
Z510-SW17 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=Z510-SW17&select=5