OMRON WPRH6-N 4M WPRH6-N 4M

E32-G14 type: special beam type; liquid level detection,
Specialty: groove type (no need to adjust the optical axis),
Bending radius (mm): R25.
Fiber element for meeting diversified needsSpecifications: Outputs; NPN (- common); 8 points.
I/O connections: M3 Screw terminals.
Rated internal circuit power supply voltage:
Supplied from the communications connector OMRON WPRH6-N 4M.
Rated I/O power supply voltage: 24 VDC WPRH6-N 4M
Allows I/O Expansion with Transistor Terminals.
Wide variety of data, such as maintenance system data,
can be collected without affecting the productivity,
of the control system.
Valuable information can be collected,
and managed through the network, including information,
on the communications power supply OMRON WPRH6-N 4M.
voltage levels, Unit wear and tear,
and equipment operating information.
Expansion via Expansion I/O Units.
With no communications baud rate settings,
required and detachable terminal blocks,
maintenance is easier. Lock method: Solenoid lock.
Conduit size: PG13.5.
Voltage for solenoid: 24 VDC OMRON WPRH6-N 4M.
Without indicator 2NC+ 1NC (Slow-action).
Release Protective Cover Locks Using .
Controller Signals or Pushbutton.
Switches after the Cutting Tool Stops.
Moving Due to Inertia.
A mechanical lock is applied automatically when the Operation.
Key is inserted. A high level of safety is achieved using a,
mechanism where the lock is only released when voltage is,
applied to the solenoid.
Conforms to EN (TÜV) standards corresponding to the CE marking.
Certified by UL, CSA and CCC standards.
The Switch contact is opened by a direct opening mechanism,
(NC contacts only) when the protective cover is opened.
Direct opening mechanism that is EN-certified is indicated by,
on the Switch.
Auxiliary release key ensures easy maintenance and unlocks the,
door in the case of a power failure.
Tough aluminum die-cast body incorporating a switch box wwith,
degree of protection satisfying IP67, UL, and CSA TYPE6P, 13 WPRH6-N 4M.
Equipped with a horizontal and vertical conduit opening.
Models incorporating easy-to-see indicators for monitoring and,
those using an adjustable Operation Key fforr a swinging door are available WPRH6-N 4M.
The mounting direction of the head can be changed,
to allow the Operation Key to be inserted from four directions.
WPRH6-N 4M Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=WPRH6-N 4M&select=5