OMRON TL-N7MD1 2M TL-N7MD1 2M

Name: Three-tier Screw Terminal Block.
Specifications: Outputs; 8 outputs; NPN;
Without Short-circuit and,
Disconnected Line Detection.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system OMRON TL-N7MD1 2M.
A wide variety of CompoNet Slave Units,
contribute to system size reduction TL-N7MD1 2M
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error OMRON TL-N7MD1 2M. Fitting materials: Stainless steel(SUS304) .
Count: 1 .
Accessories: Description, Phillips screw Nut plat;
Material, Stainless steel Stainless steel;
Count, 2, 1.
Applicable sensor (mounting pitch on sensor side): E3NC-LH02.
Page: Dimensions, 16. Type: H7CZ.
Configuration: 1-stage preset counter.
External connections: 8-pin socket.
Settings: 1-stage OMRON TL-N7MD1 2M.
Display digits: 6 digits.
Outputs: Contact output (SPDT).
Power supply voltage: 12 to 24 VDC/24 VAC .
Easy to Use and Easy to Read.
Basic Features.
Character height of 10 mm for better readability.
Operation is simplified by the Up Key for each digit.
Safety and Reliability.
Power supply circuit and input circuits are isolated inside the Counter.
Set value limit function prevents unexpected operation of output,
devices caused by setting mistakes.
Output counter function helps in managing the service life of the,
Counter or the load.
Other Features.
Waterproof, dust-proof structure (UL508 Type 4X and IP66).
Key protection. Size: M18, Non-shielded.
Sensing distance: 16.0 mm.
Connection: M12 connector.
Body material: Brass.
Thread length (overall length): 61 (75).
Ouutput configurattion: PNP TL-N7MD1 2M.
Operation mode NC.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpiecees are eliminated TL-N7MD1 2M.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization.
TL-N7MD1 2M Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=TL-N7MD1 2M&select=5