OMRON CJ1W-B7A04 name: B7A Interface Units OMRON CJ1W-B7A04

Model: C200H-ME431.
Description: EEPROM, 4K words, no clock.Model: C500-BC091(3G2A5-BC091).
8 slots(6 linkable slots).

Unit type: CJ1 Basic I/O Units.
name: B7A Interface Units.
Specifications: I/O points, 64 outputs;
External connection, Removable terminal block CJ1W-B7A04.
No. of words allocated: 4 words.
Current consumption: 5VV, 0.07A; 24V, --.
Standards: UC1, CE.
It transmits 16 points of I/O signals per,
word with a pair of cables.
Easy and minimized wiring effort,
The B7A Interface Unit and B7A Link Terminal,
can be used in the same way as a standard,
Basic I/O Unit and I/O Terminal without,
any need to worry about communications CJ1W-B7A04.
This characteristic reduces the wiring,
when using more than one relatively remote,
sensor or actuator CJ1W-B7A04.
Name: Bit Slave Units with e-CON Connectors.
Specifications: Inputs; 2 inputs; NPN.
Simple and Intelligent Bit Slaves,
with Industry-standard e-CON connectors.
Slave Units capable of 2-point bit-level distribution.
The I/O power supply is supplied from the communications,
power in the previously connected flat cable, and has a,
short-circuit detection function for protection OMRON CJ1W-B7A04.
Industry-standard e-CON connectors.
Short-circuit protection safeguards the network,
from I/O short circuits OMRON CJ1W-B7A04.
Simple communications connections,
with flat cable and connectors.
Bit-level distribution to support,
essentially any application. I/O Cable (for I/O to Interface Racks) 2 m (L) CV500-CN222Unit type: CJ1 CPU Bus Units.
Product Name: Serial Communications nits OMRON CJ1W-B7A04.
Specifications:Communications Interface,
2 RS-422A/485 ports;
Communications functions,
The following functions can be,
selected for each port:
Protocol macro Host Link,
NT Links (1:N mode)Serial Gateway,
No-protocol Modbus-RTU Slave.
No. of unit numbers allocated: 1.
Current consumption : 5V, 0.38A; 24V,--.
Standards: UC1, N, L, CE.
The Serial Communications Units That Enable,
High-speed Connections with External Devices.
Each Serial Communications Unit provides two,
serial communications ports: RS-232C and,
RS-422A/485, and the serial communications,
mode can be set separately for each port from,
Protocol Macro, Host Link, NT Link,
Serial Gateway, and No-protocol CJ1W-B7A04.