LK Automation Limited
Home >> Download >> Yaskawa >> Manual Download >> Servo amplifier SGDV-210D21A002000 Design and Maintenance Manual Yaskawa SGDV-210D21A002000 USER'S MANUAL

Servo amplifier SGDV-210D21A002000 Design and Maintenance Manual Yaskawa SGDV-210D21A002000 USER'S MANUAL

Product model: SGDV-210D21A002000
Name: Servo amplifier
Brand: Yaskawa
Sort: Design and Maintenance USER'S MANUAL
File language: English
File size: 5.01MB
Large capacity SGMVV type servo motor.
Rated output: 55KW.
Voltage: three phase AC400V.
Serial encoder: 20 bit absolute value type.
Rated speed: 1500r\/min.
The main mechanical structure: support mounting type, straight shaft (no keyway and screw).
Optional parts: with dust.
The use of small, low inertia servo motor, also can give full play to the strength of the mechanical properties SGDV-210D21A002000 Manual SGDV-210D21A002000
The new model SGMVV with a rated output of 22~55KW, the amount of passenger speed 800r\/min and 1500r\/min products.
After the motor is installed, the phase is started to run immediately.
Even if the servo is not adjusted, as long as the moment of inertia is within the allowable range,
Even if the load changes, it can be driven stably, and the vibration will not happenServo motor type SGMPH (speed: 3000r\/min) SGDV-210D21A002000 Manual.
Power: 0.75kw.
Power supply voltage: three phase AC200V.
Serial encoder: 13 bit relative value.
Design sequence: Waterproof standard IP67.
Shaft end: straight shaft with screw key.
Optional parts: with oil seal, DC24V brake.
Partial flat series: the need to install the servo motor in a small space SGDV-210D21A002000 Manual.
Flexible user system.
For you to build the best system to enrich the product line to support you.
Products with single phase 200V, single phase 100V, three-phase 200V,
And for the absolute value encoder, a variety of motor with brake, belt speed reducer.
And then, because of its compliance with international standards, in the world can be assured that the use of Yaskawa SGDV-210D21A002000 USER'S MANUAL.
Smooth running, there is a very seasonal rate of observation and control,
The speed fluctuation of the motor is greatly reduced, and the speed of the motor can be smoothly operatedSigma -V series servo motor SGMGV Yaskawa SGDV-210D21A002000 USER'S MANUAL.
Rated output: 11kw.
Power supply voltage: AC200V.
Serial encoder: 20 bit Delta (standard).
Design sequence: Standard (bolt for silver) Yaskawa SGDV-210D21A002000 USER'S MANUAL.
Shaft end: straight shaft, without keyway (standard).
Optional: no matching.
A variety of mechanical feed shaft drive (high speed feed).
Variety is complete (300W ~ 15kW, with hold brake).
Equipped with a high resolution serial encoder (20 bit).
Standard using IP67.
Use example:
Machine tool。
Transport machinery.
Handling machinery。
Food processing machinery.
Rating and specifications:
Rated time: continuous.
Vibration level: V15.
Insulation resistance: DC500V, 10M, or above.
Using ambient temperature: 0 ~ 40 degrees C.
Excitation mode: permanent magnet type.
Installation method: flange type.
Heat resistannce grade: F SGDV-210D21A002000 Design and Maintenance.
Insulation withstand voltage: AC1500V 1 minutes (200V), AC1800V 1 minutes (400V).
Protection mode: fully enclosed self cooling type IP67 (except shaft through part).
The use of environmental humidity: 20 ~ 80%% (not dew) SGDV-210D21A002000 Manual.
Connection mode: direct connection.
Rotation direction: clockwise direction (CCW) rotation at the load side under the direction of rotation
Related products
Yaskawa
Best use servo unit
SGDV-210D01A003FT008
Yaskawa Best use servo unit SGDV-210D01A003FT008
High performance, use the est type of servo
Yaskawa
Secure module servo unit
SGDV120D21A002000010
Yaskawa Secure module servo unit SGDV120D21A002000010
Security module. Maximum applicale motor ca
Yaskawa
Servo driver for linear servo motor
SGDV-210D15A
Yaskawa Servo driver for linear servo motor SGDV-210D15A
Sigma -v series servo unit SGDV. Maximum appl