LK Automation Limited
Home >> Download >> Yaskawa >> Manual Download >> Safety Light Curtain SGD7S-200A10A MECHATROLINK-II Communications INSTRUCTION SHEET Yaskawa SGD7S-200A10A Manual

Safety Light Curtain SGD7S-200A10A MECHATROLINK-II Communications INSTRUCTION SHEET Yaskawa SGD7S-200A10A Manual

Product model: SGD7S-200A10A
Name: Safety Light Curtain
Brand: Yaskawa
Sort: MECHATROLINK-II Communications INSTRUCTION SHEET
File language: English
File size: 5.62MB
Sigma -V series servo motor SGMGV.
Rated output: 2.9kw.
Power supply voltage: AC200V.
Serial encoder: 20 bit Delta (standard).
Design sequence: standard.
Shaft end: straight shaft with keyway, with screw (optional).
Optional: with hold brake (DC90V).
A variety of mechanical feed shaft drive (high speed feed) SGD7S-200A10A INSTRUCTION SHEET.
Variety is complete (300W ~ 15kW, with hold brake).
Equipped with a high resolution serial encoder (20 bit) SGD7S-200A10A
Standard using IP67.
Use example:
Machine tool。
Transport machinery.
Handling machinery。
Food processing machinery.
Rating and specifications:
Rated time: continuous.
Vibration level: V15.
Insulation resistance: DC500V, 10M, or above.
Using ambient temperature: 0 ~ 40 degrees C SGD7S-200A10A INSTRUCTION SHEET.
Excitation mode: permanent magnet type.
Installation method: flange type.
Heat resistance grade: F.
Insulation withstand voltage: AC1500V 1 minutes (200V), AC1800V 1 minutes (400V).
Protection mode: fully enclosed self cooling type IP67 (except shaft through part).
The use of environmental humidity: 20 ~ 80% (not dew).
Connection mode: direct connection.
Rotation direction: clockwise direction (CCW) rotation at the load side under the direction of rotationServo motor type SGMAH (speed: 3000r/min) SGD7S-200A10A INSTRUCTION SHEET.
Power: 30W.
Power supply voltage: single phase AC100V.
Serial encoder: 13 bit relative value.
Design sequence: A.
Shaft end: straight shaft with key Yaskawa SGD7S-200A10A Manual.
Optional parts: with DC90V brake.
Improve mechanical properties.
In order to achieve a higher production efficiency, SGDMAH type to the best control to explore the highest performance of the machine,
Compared with the original models, CPU computing time for its 1/2, through the expansion of the new control algorithm,
Positioning time is shortened to the original product of 1/3, to achieve a good response Yaskawa SGD7S-200A10A Manual Yaskawa SGD7S-200A10A Manual.
The parameter setting and maintenance time is shortened.
In order to establish a high degree system in a short time, the use of the simplicity of the.
Flexible use of online automatic adjustment function,
Automatic adjustment of servo system with mechanical characteristics.
Then use the main loop / control circuit power separation and alarm tracking memory function, can be simple to carry out maintenance.Equipped with DeviceNet communication function type servo unit (servo controlled power supply drive type)
Maximum applicable motor capacity: 0.2kw.
Power supply voltage: single phase AC100V.
Interface: instruction selection and installation (rotary type servo motor).
Matching (hardware): paint.
Matching (software): standard.
Matching (parameter): standard.
Optional modules: DeviceNet module (servo control power driver) + full closed loop module.
Communication specifications for DeviceNet based on open field network.
The combination of the DeviceNet controller and the V can be used to implement motion control in a simple way.
Can make use of the city''s rich DeviceNet support software.
Can use the upper controller to manage the servo information.
Through the network from the host controller to monitor the running status of the servo drive, alarm information.
Using the upper controller to manage the servo information, which can improve the maintenance (shorten the debugging time, improve the efficiency of maintenance operations).
Save wiring, reduce the cost and improve the reliability.
Because the upper controller and the servo unit are connected througgh the communication network, the connection is greatly saved SGD7S-200A10A MECHATROLINK-II Communications.
Built in rich positioning function.
Can be from the upper controller (PLC or computer) to carry out a variety of simple positioning action.
Equipped with simple positioning, continuous rotation, and return to the origin of continuous rotary motion positioning, running and other rich positioning function SGD7S-200A10A INSTRUCTION SHEET.
Related products
Yaskawa
Single axis servo driver
SGD7S-2R8A30A001
Yaskawa Single axis servo driver SGD7S-2R8A30A001
Single axis servo driver SGD7S. Maximum appli
Yaskawa
Single axis servo driver
SGD7S-590A00A002
Yaskawa Single axis servo driver SGD7S-590A00A002
Sigma -7 series servo unit SGD7S. Maximum app
Yaskawa
Single axis servo driver
SGD7S-R90A10A
Yaskawa Single axis servo driver SGD7S-R90A10A
Servo driver SGD7S. Maximum applicale motor
Yaskawa
Single axis servo driver
SGD7S-7R6A20A
Yaskawa Single axis servo driver SGD7S-7R6A20A
Single axis servo driver SGD7S. Maximum appli