Proface CA6-USB232-01 Manual CA6-USB232-01 User's Manual

COM1 interface with the cable (RS-232C), used to connect directly to the Q series connection module (or other host)For RGB input USB cable to prevent disconnection (2 / set)USB cable clamp for preventing disconnection of connection (5 / set)Protection for GP rear connectors (large and small for each of the 1) CA6-USB232-01 User's Manual. Used to convert the USB interface to the serial interface (RS-232C) CA6-USB232-01 A modem or bar code reader that can be connected to support RS-232C.COM1 interface with the cable (RS-232C), used to connect directly to the CPU series PLC FX (not the same time using the programming controller)A connector that connects the DIO interface for connecting an external I/O device (5 sets).Adapter for EX module (5 / set)For 5 CA6-USB232-01 User's Manual. 7 inch models, prevent cable loose from the USB cable fastening clip (5 / set).For the operation screen (5 pieces) (GP3000H standard).COM2 adapter for converting the COM2 interface to the RS-422 terminal blockThe host controller is connected to the host computer interface, which is used for multiple connection (n:1) communication.Used in a variety of host and man-machine interface for RS-422 connection12 CA6-USB232-01 User's Manual. 1 inch /10.4 inch (STN), thin film for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).5.7 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).10.4 inches and above, used to connect the power cord (5 / set).Expansion module for the GP3000 access to the PROFIBUS network and DP PROFIBUS master communicationExpansion module for the GP3000 access to the CC-Link network and communication with the CC-Link master station (support for intelligent devices)COM2 interface with the cable (RS-422), used to connect the 2-Port adapter to the man-machine interfaceExpansion module for thhe GP3000 access to the CANopen network and communication with the CANopen master stationTouch panel operation for RGB input modules (Master - from: Mini-B)Use external output for the GP3000 series of auxiliary connectors (5 / ssets) CA6-USB232-01 Manual CA6-USB232-01 Manual. 13 pin input connectors for HTB and 16 pin output connectors. (1 / set)COM1 interface with the cable for direct connection to the CPU series PLC A