PLC CP1E-N60S1DR-A Manual OMRON CP1E-N60S1DR-A OPERATION MANUAL

Name: Two-tier Screw Terminal Block.
Specifications: Inputs; 16 inputs; NPN.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction CP1E-N60S1DR-A Manual.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site CP1E-N60S1DR-A
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. C500-OA I/O Unit Triac Output 16 pts C500-OA121(3G2A5-OA121).
AC132V 1A.C500-CT/3G2A5-CT Special I/O Unit High-speed Counter Unit 50 kcps 1 pts C500-CT012(3G2A5-CT012) CP1E-N60S1DR-A Manual. Model: C200H-OD219.
No. of points: 64 pts.
Specifications: 4.5 VDC, 16 mA to 26.4 VDC, 100 mA..
Weight: 250g max.CV500-BS CPU Bus Unit BASIC Unit CV500-BSC61.
RS-232C: 1 port.
GP-IB: 1 port.
(w/EEPROM).NO. OF I/O SLOTS: 6 SLOTSName: DeviceNet Master Module.
Model: C200HW-DRM21-V1.
Baud rate: 500, 250, or 125 kbps (selectable)

DeviceNet Master Unit
The DeviceNet Master Unit Is a Multi-vendor Bus Conforming to the DeviceNet CP1E-N60S1DR-A Manual. I/O Control UnitOutput type: Transistor sourcing.
Inputs points: 24 points.
Outputs points: 16 points.Unit type: CS-series Special I/O Units.
Product name: Analog Input Units OMRON CP1E-N60S1DR-A OPERATION MANUAL.
Specifications: I/O points, 16 inputs;
Signal range selection,
Set separately for each input;
Signal range, 1 to 5 V, 0 to 5 V,
0 to 10 V, -10 V to 10 V, 4 to 20 mA;
Resolution, 1/8,000 (Settable to 1/4,000);
Conversion speed, 250 s/point max OMRON CP1E-N60S1DR-A OPERATION MANUAL.
(Settable to 1 ms/point).
Externa connection, MIL connector.
Current consumption: 5V, 0.15A; 26V, 0.06A.
Standards: UC1, CE.
For Various Analog I/Os.
Analog Input Units for converting,
analog input signals into binary data OMRON CP1E-N60S1DR-A OPERATION MANUAL.
Analog Output Units for converting ,
binary data into analog output signals. Name: e-CON Connectors.
Specifications: Inputs/Outputs;
16 inputs /16 outputs; PNP;
With Short-circuit and,
Disconnected Line Detection.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced CP1E-N60S1DR-A .
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on sitee CP1E-N60S1DR-A Manual.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error.