PFXGP4203TAD Manual Proface Smart Camera PFXGP4203TAD

The three color tower lamp installed on the fixed panel is connected with the human machine interface through the USB interface.Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface.With a fixed screw of the pre USB protection cover, in compliance with IP66F, IP67F, 1/4X Type only indoor use /13 or ATEX certification (5 / set) Proface Smart Camera PFXGP4203TAD 7.4 inches, replace the backlight (1 / set)10.4 inch screen protective cover (1 pieces)7.4 inches, installed to provide the function of dust and moistureConnector for connecting DC power cord. (linear, 5 / set)Analog /PNP output type.
Display size: 5.7 inches.
Resolution: 320 x 240 pixels (QVGA).
LCD:TFT.
Color: 65536 color Proface Smart Camera .
Ethernet interface: 1.
Serial port: 1.
CANopen interface: 1.
USB (host):1.
USB (equipment):1.
Built in DIO input: 12 points.
Built in DIO output: 6 points.
Built in AIO input: 4 points.
Built in AIO output: 2 points.
Common DIO:2 point high speed counter (with synchronous output) pulse capture input.
Dedicated DIO:2 point pulse output, PWM output.
Expansion module EX module: none.
Expansion module CANopen module: 63 stations Proface Smart Camera .
Controller memory size: EPROM 132KB FLASH (equivalent to 15000 steps (up to 60000 steps).
CANopen network
LT4000M supports data exchange with a variety of remote devices through the CANopen, easy to achieve economic and easy to use system design PFXGP4203TAD .
Can choose standard I/O module, also can choose action or control module and other more advanced products in complex application PFXGP4203TAD .
Compact size.
The volume is small but the display is fresh and bright, can create a rich and readable operation picture.
The control function of the whole and the digital I/O, analog I/O, analog temperature input and USB, serial port and Ethernet communication interface PFXGP4203TAD .
Integrated design.
Adopt integrative design, compact structure,
When the installation is only required to open a hole in the panel 22mm. PFXGP4203TAD Manual.
The display module or the control module can be easily replaced when the fault is eliminated.
Flexible installation.
The control module can be installed on the DIN guide rail by using the split installation cable,
And the dissplay module is installed in other locations Proface Smart Camera .
Display module occupies a small space, even if the space is limited, but also can be flexible to install.