OMRON K2CM-Q1M Communications Manual Digital Temperature Controllers Manual

Setting range: 10 to 100 A AC, 20 to 200 A AC.
Power supply voltage: 24 VAC/DC.
Ideal for Current Monitoring for.
Industrial Facilities and Equipment.
Monitor for overcurrents or undercurrents.
Use commercially available CTs (CT current on secondary,
side: 0 to 1 A or 0 to 5 A).
Manual resetting and automatically resetting supported by one Relay K2CM-Q1M Manual.
Startup lock and operating time can be set separately K2CM-Q1M
One SPDT output relay, 5 A at 250 VAC (resistive load).
Output relay can be switched between normally open and normally closed.
Output status can be monitored using LED indicator.
Inputs are isolated from the power supply. Category: external supply 100mA DC10V.
Input type: load sensor, mV input type K2CM-Q1M Manual.
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
Linearity: voltage; NPN open collector (HH, H, PASS, L, LL).
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: AC100 ~ 240V.
To support the sensor input, the pressure, load, torque and weight were measured,
Is an ideal indicator for judging whether an automatic device and a screening device are qualified K2CM-Q1M Manual.
Action determine the color, can switch the green / Red 2 kinds of color display.
Equipped with the sub pressure gauge for monitoring the operation trend.
External event inputInput type: DC current input.
Output type: relay contact; 1c H; PASS, L: each 1c.
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with OMRON Digital Temperature Controllers Manual.
External supply 80mA DC12V.
Power supply voltage: AC/DC24V OMRON Digital Temperature Controllers Manual.
96 (W) * 48 (H * 95mm) some models are not equipped with depth.
The most suitable voltage and current signal simulation, measurement and display, identification of the panel table.
Action determine the color, can switch the green / Red 2 kinds of color display.
Equipped with the sub pressure gauge for monitoring the operation trend OMRON Digital Temperature Controllers Manual.
External event input can be applied to a variety of measurement and identification situations.
Series of DeviceNet type.
Depth (panelA Process Indicator Ideal for Discriminating and.
Displaying Measurements for Voltage/Current.
Signals.
Easy recognition of judgement results using color display that can be,
switched between red and green.
Equipped with a position meter for monitoring operating status trends.
External event input allows use in various measurement and discrimina,
tion applications.
Series expanded to include DeviceNet models.
Short body with depth of only 95 mm (from behhind the front panel),
or 97mm for DeviceNet models K2CM-Q1M Communications Manual.
UL certification approval (Certification Mark License).
CE Marking conformance by third party assessment body.
Water-resistant enclosure conforms to NEMA 4X (equivalent to IP666) K2CM-Q1M Manual.
Capable of high-speed sampling at 50 times per second (20 ms).
Easy-to-set two-point scaling allows conversion and display of any userset values.