LK Automation Limited
Home >> Download >> OMRON >> Manual Download >> OMRON E5CC-QX0DSM-000 RS-485 CompoWay/F INSTRUCTION MANUAL

OMRON E5CC-QX0DSM-000 RS-485 CompoWay/F INSTRUCTION MANUAL

Product model: E5CC-QX0DSM-000
Name: Digital Temperature Controllers
Brand: OMRON
Sort: RS-485 CompoWay/F INSTRUCTION MANUAL
File language: English
File size: 2.32MB
Size: M18, Shielded.
Sensing distance: 8.0 mm.
Connection: M12 connector.
Body material: Brass.
Thread length (overall length): 61 (75).
Output configuration: NPN.
Operation mode NO.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor E5CC-QX0DSM-000 RS-485 CompoWay/F.
Problems such as the collision of workpieces are eliminated E5CC-QX0DSM-000
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization. Name: Small reflector.
Directional angle: 30° min.
Ambient operating temperature range: -25 to 55°C.
Ambient storage temperature range: -40 to 70°C.
Ambient operating humidity range: 35% to 85% E5CC-QX0DSM-000 RS-485 CompoWay/F.
Ambient storage humidity range: 35% to 95%.
Degree of protection: IEC IP67.
Accessories: Mounting Brackets E39-L104 (with screws). Fitting materials: Stainless steel (SUS304).
Count: 1.
Accessories: Description, Holder (upper) Holder,
(lower) Pipe Bolts M4 × 12 with Hexagonal holes,
Bolts M4 × 30 with hexagonal holes,
Phillips screws M3 × 12 (with spring and plain washers),
Spring washer M4 Plain washer M4 Nuts M4;
Material, Heat-resistant ABS resin, 66 nylon,
Stainless steel (SUS304), Iron, nickel plating,
Iron, nickel plating, Stainless steel (SUS304),
Iron, nickel plating, Iron, nickel plating,
Iron, nickel plating; Count, 1, 1, 1, 2, 1, 2, 1, 1, 3 E5CC-QX0DSM-000 RS-485 CompoWay/F.
Applicable sensor (mounting pitch on sensor side): E3Z (25.4) E39-R1/E39-R3.
Page: Dimensions, 9. Size: 48 x 96mm.
Category: power AC100 ~ 240V with.
Shell color: black.
Control output 1: position ratio with relay output.
Control output 2: position ratio with relay output.
Control mode: position ratio control.
Auxiliary output points: 2 points.
Event entry point: 2.
Remote SP:4 to 20mA input.
Communication: RS-485.
General thermostat new high performance (high resolution, high speed, high precision input) type products.
Support simple operation, preventive maintenance.
A new type of liquid crystal, which can communicate with the front through the infrared port, is adopted,
Visual angle, contrast can be improved.
High resolution 5 bit display / can display 0.01 degrees C.
High speed sampling period 60ms.
All models complete a variety of (to the thermocouple /Pt/ analog input switching), 1 machines to support a variety of sensors.
Also supports remote SP.
Add PV/SV status display function, convenient to check the state of the thermostat (automatic / manual, RUN/STOP, alarm),
Interactive display PV/SV E5CC-QX0DSM-000 INSTRUCTION MANUAL.
By supporting software (Ver.4.0 CX-Thermo) to carry out a simple function (AND/OR logic and delay),
Be able to execute flexible contact output E5CC-QX0DSM-000 INSTRUCTION MANUAL.
Increase the control output ON/OFF number counting function, can predict the temperature controller internal relay fault.
Position ratio type.
Related products
OMRON
Digital temperature controller
E5AC-CC2DSM-000
OMRON Digital temperature controller E5AC-CC2DSM-000
Size: 96 x 96mm. Control output 1: relay out
OMRON
Digital temperature controller
E5CC-QX2AUM-000
OMRON Digital temperature controller E5CC-QX2AUM-000
Size: 48 x 48mm. Control output: voltage out
OMRON
Digital temperature controller
E5CC-QX2DSM-006
OMRON Digital temperature controller E5CC-QX2DSM-006
Size: 48 x 48mm. Control output 1: voltage o
OMRON
Digital Temperature Controller
E5CC-QX2ASM-800
OMRON Digital Temperature Controller E5CC-QX2ASM-800
Control output 1: Voltage output. Auxiliary