CXONE-AL50D-V4-UP Manual OMRON Optical Remote I/O CXONE-AL50D-V4-UP CX-Position Ver. 2.5 Installation Guide

Applicable CPU Units: CQM1H-CPU51/61.
Serial Communica-tions ports>Port 1: RS-232C: 19.2 kbps max., 15 m max.
Serial Communica-tions ports>Port 2: RS-422A/485: 19.2 kbps max., 500 m max.
Dimensions: 25 × 110 × 107 mm (W × H × D).
Weight: 90 g max.
Model : CVM1D-BI102.
10-slot.C500-OD I/O Unit Transistor Output 32 pts C500-OD414(3G2A5-OD414) OMRON Optical Remote I/O Installation Guide.
DC12～48V 0 CXONE-AL50D-V4-UP3A.Model : C500-LDP01-V1.
Has 40 instructions (same as a C20P.) Input and output points (16 each.).For C200H-PRO27-E Hand-held Programming Console ming Console.
4m.Name: Three-tier Screw Terminal Block.
Specifications: Inputs/Outputs;
8 inputs/8 outputs; PNP;
Without Short-circuit and,
Disconnected Line Detection.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet OMRON Optical Remote I/O Installation Guide.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error OMRON Optical Remote I/O Installation Guide. C500-CP Special I/O Unit Cam Positioner Unit C500-CP131.Model: CPM2C-10EDR. Units with 10 I/O points.
1 I/O terminal block CXONE-AL50D-V4-UP Installation Guide.
Inputs: 6 inputs.
Outputs: 4 outputs.
Input type: 24 VDC.
Output type: relay.1 axis, Pulse output. speeds: 1 to 100, 000 pps CXONE-AL50D-V4-UP Installation Guide. Specifications: 1 × RS-232C port + 1 × RS-422/485 port, protocol macro function.Unit classification: CJ1 Special I/O Units.
Product name: Position Control Units,
(High Speed type).
Specifications; Control method/Control,
output interface: Pulse-train open-collector,
output with Pulse Counter Function;
Number of control axes : 4 axes CXONE-AL50D-V4-UP Installation Guide.
No. of unit numbers allocated: 2.
Current consumption: 5V, 0.31A; 24V, --.
Standards: UC1, CE.
Motion Control Capabilities with Unit,
Synchronization and Even Higher Speed. CXONE-AL50D-V4-UP Manual.
Models are available with 2 or 4 axes,
and open-collector or line-driver outputs.
The CJ1W-NC214/NC414 have open-collector outputs,
and the CJ1W-NC234/NC434 have line-driver outputs.
Control 2 or 4 Axes High-speed, high-resolution,
position control is possible for servomotors ,
and pulse motors, and even linear motors,
and direct drive motors OMRON Optical Remote I/O Installation Guide.